A Tape with Versatility
Originally developed for heating, ventilation and air conditioning (HVAC) applications, duct tape is used today in a variety of maintenance, repair and construction settings. 3M™ Performance Plus Duct Tape 8979 removes cleanly for up to six months from most opaque surfaces, even outdoor applications after sun and weather exposure. It sticks immediately and stays on for up to one year without deterioration. The tape was tested for flame spread using test method UL723, ASTM E84 and can be used at temperatures as high as 200°F for up to 30 minutes. This sturdy cloth-reinforced tape can be torn from the roll by hand and sticks instantly, providing a wide range of convenient solutions. We offer 3M™ Performance Plus Duct Tape 8979 in slate blue, black and olive to enhance utility and aesthetics.
Recommended Applications
- Outdoor duct tape applications
- Temporary weather sealing
- Capping pipe
- Patching
- Bundling
- Reinforcing
- Tabbing
- Taping/splicing insulation
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
- Hanging polyethylene drapes
- Protecting against light sandblast overspray
Built to Stick
3M’s family of rugged cloth and duct tapes adheres to most surfaces for applications ranging from bundling to moisture proofing, sealing to splicing, reinforcing to hanging poly drapes. Available in a variety of colors and strengths, these tapes are best known for their hand tearability, high tensile strength and conformability.

3M 55701, Stikit Film Disc w/Tab 375L, P180, 6 in x NH, Die 600Z, 7100106619, 250 per case
3M 40001, E-A-R UltraFit Earplugs 340-4002, Corded, Carrying Case, 200 Pair/Case, 7000002322
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case
3M 33440, Cubitron II File Belt, 33440, 80+, 10 mm x 330 mm (3/8 in x 13 in), 7100033195, 10 belts per carton, 5 cartons per case
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
3M 43797, Hi-Strength 90 Spray Adhesive, Clear, 5 Gallon Drum (Pail), 7100004706
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 11418, Roloc Disc 361F, P240 XF-weight, TR, 3 in, Die R300V, 7000045106
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
Dynabrade 51623 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
Dynabrade 14000 Dynafile Abrasive Belt Tool
3M 97986, Hi-Strength 94 ET Cylinder Spray Adhesive, Red, Large Cylinder (Net Wt 26.2 lb), 7100018953
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 05011, Cloth Belt 384F, 120+ XF-weight, 3/4 in x 20-1/2 in, Fabri-lok, 7100141429, 200 per case
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
3M 87429, Final Finishing Pads 10199NA4PK, 3 3/4 in x 6 in x 5/8 in, Replaces 0000 Steel Wool, 7100096075, 4 pads per pack
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
Dynabrade 58503 3-1/4" W x 5" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
3M 78469, Cubitron II Depressed Center Grinding Wheel, T27, 4 in x 1/4 in x 3/8 in, 7100086893, 20 per case
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790 
