Excellent for Temporary Use
3M™ Paper Masking Tape 2214 is an everyday-use, crepe-paper masking tape ideally suited for general indoor use and paint masking. Its rubber adhesive sticks instantly to paper, metal, wood plastic, glass, painted and other clean surfaces while resisting lifting or curling. In paint masking applications, it can withstand use in temperatures up to 200°F/93°C for up to 30 minutes work time.
Recommended Applications
- General indoor light-duty use
- Light duty holding or bundling applications
- Non-critical paint masking
- Light duty sealing
- Labeling and attaching
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.

Dynabrade 58912 5" Dia. Compact Rebel Right Angle Disc Sander
Dynabrade Nitro Series DGR31 .3hp, 16,000 RPM, Right Angle Die Grinder, 1/4 Collet
ACS Diamond Cloth Belt, CX1250 3" X 30" 60M/250U
Dynabrade 52294 .7 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 20,000 RPM, 1/4" Collet
Dynabrade 92740 2" W x 150' L 30 Micron A/O Lapping Film DynaCut Roll
Dynabrade 82546 1/2" W x 18" L 36 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 9900 6" Dia. Gear-Driven Sander, .25 HP, 1,800 RPM, 7/16" Orbit, Hook-Face Pad
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
Standard Abrasives 877004, Unitized Mounted Point, 731 B90 x 1/8 in, 3M 7010368367
Dynabrade 11462 Dynabelter Finisher
Standard Abrasives 718249, A/O Straight Cartridge Roll, 3/8 in x 2 in x 1/8 in 36, 7100102785
Standard Abrasives 703579, Spiral Band, 1-1/2 in x 1-1/2 in 60, 7010299522
Dynabrade 43506 .4 hp 3" (76 mm) Dia. Extension Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
Standard Abrasives 853753, GP Plus Wheel, 8 in x 1/2 in x 3 in 8S FIN, 7000047121
Standard Abrasives 863299, Quick Change TR S/C Unitized Wheel, 632, 2 in x 1/4 in, 7010330149
Dynabrade 93349 Carbide Burr, 1/8" Dia., SN-42 D/C Burr, 10 Degree Inverted Cone, 3/16" Flute L, 1/8" Shank
Dynabrade 50018 Collet, M8 x 1.0 Female Thread, 3/8" Capacity
Standard Abrasives 854193, Deburring Wheel 6 in x 1 in x 1 in 9S FIN, 7000046731
Standard Abrasives 269201, Cross Buff Mandrel, 4 in x 1/4 in Shank x 1/4"-20F, 7010368742 
