A Venture Tape Unlike Any Other
A high quality polyethylene cloth tape coated with a natural rubber pressure sensitive adhesive system, our 3M™ Venture Tape™ Cloth Duct Tape 1500 has very high tack, high peel and adheres to corners and irregular surfaces. The polyethylene-coated, cloth-reinforced backing conforms to curved surfaces and resists moisture and humidity while the natural rubber adhesive gives you instant stick and long-term hold. The tape tears easily, across or down, without curling. It measures 10 mil thick, which gives it additional resistance to abrasion when compared to its thinner counterparts.
Recommended Applications
- Patching
- Bundling
- Reinforcing
- Tabbing
- Taping/splicing insulation
- Capping pipe
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
- Hanging polyethylene drapes
Built to Stick
3M’s family of rugged cloth and duct tapes adheres to most surfaces for applications ranging from bundling to moisture proofing, sealing to splicing, reinforcing to hanging poly drapes. Available in a variety of colors and strengths, they’re known best for their hand tearability, high tensile strength and conformability.

Dynabrade 79242 5" Dia. x 180 Grit A/O Non-Vacuum PSA DynaCut Disc, 100/Roll
Dynabrade 91434 1/4" W x 24" L 60 Grit A/O DynaCut Belt, 50/pack
Dynabrade 50938 Pin
Dynabrade 40734 Spindle Lock Assembly
Dynabrade 57404 2-3/4" W x 8" L Dynaline Sander, Central Vacuum
Dynabrade 57088 Bearing
Dynabrade 52986 3/8" Drill, .4 HP, Rear Exhaust, 500 RPM
Dynabrade 12128 Valve Spring
Dynabrade 51307 .5 hp Straight-Line Die Grinder, Rear Exhaust, 24,000 RPM, 1/4" Collet
Dynabrade 98264 - 3/8" NPT Female Plug
Dynabrade 90707 5" Dia. x 3" W, 36 Grit, Z/A DynaCut Band, 10/pack
Dynabrade 79403 4-1/4" Dia. x 4" W x 5/8"-11 Center Thread, Very Fine, DynaBrite Surface Conditioned Flap Roll
Dynabrade 52835 1/4" Drill, .4 HP, Rear Exhaust, 5,500 RPM
Dynabrade 53783 Cone or Plug Grinder (Single Extension), Steel Housing, 20,000 RPM, 3/8"-24 Male Thread Spindle
Dynabrade 01797 Exhaust Cover
Dynabrade 56727 .4 hp 7 Degree Offset Die Grinder, Central Vacuum, 5,000 RPM, 1/4" Collet
Dynabrade 59467 Dynorbital-Spirit Drop-In Motors (10 Pack) with Repair Tools Included
Dynabrade 11394 DF II Contact Arm Ass'y, 24" Belt Offset
Dynabrade 64492 36" (91 cm) W x 72" (183 cm) L Downdraft Sanding Table, 220 V (AC)
Dynabrade 96334 Plug
Dynabrade 56819B - 5" (127 mm) Dia. Central Vacuum Dynorbital Supreme Random Orbital Sander
Dynabrade 01494 Air Inlet Bushing
Dynabrade 79118 1/8" W x 18" L 80 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade 96233 Motor Tune-Up Kit
Dynabrade 98261 - 3/8" Female Coupler
Dynabrade 96394 - 1-1/4" Coaxial Vac/Air Cuff
Dynabrade 61465 Raptor Vac Air Powered Portable Vacuum System, 6.25 Gallon
Dynabrade 45290 Rotor
Dynabrade 79328 4-1/2" Dia. x 7/8" Center Hole, 80 Grit, Ceramic DynaCut Fiber Disc, 25/box
Dynabrade 52668 1 hp Straight-Line Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet 
