-
×
Dynabrade 53967 - 5" (127 mm) Interface Pad, Double-Sided Hook-Face, Short Nap
1 × $11.69 -
×
Dynabrade 01797 Exhaust Cover
1 × $61.64 -
×
Dynabrade 02649 Bearing
1 × $16.99 -
×
Dynabrade 50617 Dust Collection System
1 × $78.05 -
×
Dynabrade 91727 DynaMesh 6" 150 Grit Hook & Loop Discs, 50 per box
1 × $69.75 -
×
3M 15253, Venture Tape FSK Facing Tape 1525CW, Silver, 72 mm x 45.7 m, 7100043764
16 × $20.15 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 39000 1" Type C, Roto Peen Flaps, 1 Per Pack
1 × $38.62 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
2 × $18,352.22 -
×
Dynabrade 54421 3" Dia. Right Angle Disc Sander, Steel Housing, Rear Exhaust, .7 HP, 18,000 RPM, 3/8"-24 Thread
1 × $1,063.00 -
×
Dynabrade 91758 DynaMesh 11" 500 Grit Hook & Loop Discs, 25 per box
1 × $139.14
-
×
Dynabrade 78742 1/8" x 3/8"-B97 DynaFire A/O Mounted Point, Vitrified, 5/pack
5 × $2.18 -
×
Dynabrade 91717 DynaMesh 5" 220 Grit Hook & Loop Discs, 50 per box
1 × $53.50
-
×
Dynabrade 51706 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $558.00 -
×
Dynabrade 92738 2" W x 150' L 15 Micron A/O Microfinishing Film DynaCut Roll
1 × $133.01 -
×
Dynabrade 64490 33" (84 cm) W x 60" (152 cm) L Downdraft Sanding Table, 220 V (AC)
2 × $4,192.35 -
×
Dynabrade 21485 ND3217, Upper Motor Bearing Plate
1 × $65.09 -
×
Dynabrade 91725 DynaMesh 6" 100 Grit Hook & Loop Discs, 50 per box
1 × $69.75
-
×
Dynabrade 52669 1 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
1 × $607.00 -
×
Dynabrade 79824 3" P2500 Grit Dynasoft Finishing Film Non Vac Hook Face Disc, 50 per box
1 × $62.63 -
×
Dynabrade 92938 5" Dia. x 3-1/2" W Standard Dynacushion Pneumatic Wheel
1 × $110.94 -
×
Dynabrade 12205 Stockade Reciprocating Saw, .4 HP, 2,400 SPM
1 × $1,349.00 -
×
3M 95561, Venture Tape Aluminum Foil Tape 1521CW, Silver, 48 mm x 45.7 m, 2.8 mil, 7100043781
24 × $13.18
3M 49381, Die-Cut Sandblast Stencil 519YT, Tan, 25 in x 10 yd, 48 mil, 1 roll per case, Tractor Feed, 7000123990
$289.04
Factory Stock, 7-10 Day Leadtime
3M Die-Cut Sandblast Stencil 519YT features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides greater visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design.
Offers Excellent Blast Resistance and High Adhesion to Stone
Ideal for die-cutting, flatbed and friction fed formats, 3M™ Die-Cut Sandblast Stencil 519YT helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment.
Recommended Applications
- Protects granite, marble and other stone surfaces during blasting operations
It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil’s rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 on axed or frosted surfaces if increased adhesion is desired.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
