-
×
Norton 66623335427, 2" Dia Vortex Rapid Prep Quick-Change Non-Woven Abrasive Disc, Medium Grade, 50 Each
50 × $1.70 -
×
3M 99633, Scotch-Weld Pressure Fit/High Temperature Retaining Compound RT48, Green, 250 mL Bottle, 7100170130, 2/case
2 × $133.06 -
×
3M 62661, Scotch-Weld General Purpose Retaining Compound RT09, Green, 10 mL Bottle, 7100039228, 10/case
10 × $12.22 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
30 × $7.30 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 20907, PSA Cloth Disc 348D, P120 X-weight, 2 in x NH, Die 200P, 7000118875
200 × $0.71 -
×
3M 06847, Overspray Masking Liquid Dry, 1 Gallon, 7010309222
4 × $69.38 -
×
3M 49938, Roloc Disc 361F, 80 YF-weight, TSM, 2 in, Die RS200PM, 7000119019
200 × $0.97 -
×
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
1 × $25.96 -
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $79.81 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 33066, Cloth Belt 341D, P100 X-weight, 25 in x 48 in, Sine-lok, Single-flex, 7010308084, 5 per case
5 × $49.00
3M 49381, Die-Cut Sandblast Stencil 519YT, Tan, 25 in x 10 yd, 48 mil, 1 roll per case, Tractor Feed, 7000123990
$289.04
Factory Stock, 7-10 Day Leadtime
3M Die-Cut Sandblast Stencil 519YT features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides greater visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design.
Offers Excellent Blast Resistance and High Adhesion to Stone
Ideal for die-cutting, flatbed and friction fed formats, 3M™ Die-Cut Sandblast Stencil 519YT helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment.
Recommended Applications
- Protects granite, marble and other stone surfaces during blasting operations
It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil’s rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 on axed or frosted surfaces if increased adhesion is desired.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
