-
×
3M 26584, Accuspray Refill Pack for PPS Series 2.0, Orange, 1.4 mm, 7100152954
5 × $6.63 -
×
3M 62663, Scotch-Weld General Purpose Retaining Compound RT09, Green, 250 mL Bottle, 7010367430, 2/case
2 × $160.98 -
×
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
36 × $18.24 -
×
3M 27008, 642WY, 3" X 30", 50000 Mesh, Diamond Cloth Belts, 7010533172
1 × $147.65 -
×
3M 14502 Scotch-Brite Surface Conditioning Belt, 3/8 in x 13 in, A MED, 7100103026
20 × $3.56 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 24" 75U
16 × $5.80 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $409.44 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 67925, Cloth Belt 777F, P120 YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010363457, 200 per case
200 × $2.18 -
×
3M 87103, Cloth Belt 341D, 24 X-weight, 9 in x 20 in, Fabri-lok, Single-flex, 7010326200, 20 per case
20 × $18.86 -
×
Dynabrade 58509 3" W x 4-1/4" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $237.91 -
×
3M 20922, PSA Cloth Disc 348D, 60 X-weight, 1-1/2 in x NH, Die 150S, 7010326528.
500 × $0.48 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 26109, PPS Series 2.0 Adapter, Type S23, 1/4 Female, 18 Thread NPS, 7100135941
4 × $25.96 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.37 -
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $87.61 -
×
3M 80176, Cloth Belt 777F, 50 YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7010307734, 20 per case
20 × $34.29
3M 49381, Die-Cut Sandblast Stencil 519YT, Tan, 25 in x 10 yd, 48 mil, 1 roll per case, Tractor Feed, 7000123990
$289.04
Factory Stock, 7-10 Day Leadtime
3M Die-Cut Sandblast Stencil 519YT features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides greater visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design.
Offers Excellent Blast Resistance and High Adhesion to Stone
Ideal for die-cutting, flatbed and friction fed formats, 3M™ Die-Cut Sandblast Stencil 519YT helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment.
Recommended Applications
- Protects granite, marble and other stone surfaces during blasting operations
It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil’s rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 on axed or frosted surfaces if increased adhesion is desired.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
