-
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
Standard Abrasives 717639, Aluminum Oxide Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 50, 7100115215
50 × $0.92 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $25.96 -
×
3M 49941, Roloc Disc 361F, 80 YF-weight, TSM, 3 in, Die RS300VM, 7000148151
200 × $1.33 -
×
3M 36516, Green Corps Abrasive File Belt, 40 grit, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100225352, 20 Belts Per Carton, 5 Cartons Per Case
5 × $51.00 -
×
3M 70147, Hookit Center Water Feed Disc Hand Pad, 3 in x 7/8 in, 7000045752
10 × $23.86 -
×
3M 20245, HOOK AND LOOP DISC PAD HOLDER 20245, 7 IN X 7/8 IN CENTER POST 5/8-11 INTERNAL, 7010360340
1 × $38.70 -
×
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle, RightAngle, 7000058900
24 × $168.76 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 58298, Scotch-Weld PUR Applicator Swivel Connector, 7000046653
1 × $63.37 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 36876, Self-Stick Liquid Protection Fabric, Blue, 4 in x 300 ft perroll, 7100169348, 6 Rolls Per Pack
1 × $534.33 -
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
10 × $16.71 -
×
3M 80176, Cloth Belt 777F, 50 YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7010307734, 20 per case
20 × $34.29
3M 49381, Die-Cut Sandblast Stencil 519YT, Tan, 25 in x 10 yd, 48 mil, 1 roll per case, Tractor Feed, 7000123990
$289.04
Factory Stock, 7-10 Day Leadtime
3M Die-Cut Sandblast Stencil 519YT features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides greater visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design.
Offers Excellent Blast Resistance and High Adhesion to Stone
Ideal for die-cutting, flatbed and friction fed formats, 3M™ Die-Cut Sandblast Stencil 519YT helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment.
Recommended Applications
- Protects granite, marble and other stone surfaces during blasting operations
It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil’s rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 on axed or frosted surfaces if increased adhesion is desired.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
