-
×
3M 08301, Ultrapro Autobody Sealant, 08301, Tan, 5 oz Tube, 7100142901, 6 per case
6 × $25.60 -
×
Standard Abrasives 863110, A/O Unitized Wheel, 631, 2 in x 1/4 in x 1/4 in, 7000144629
10 × $5.31 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 25705, Scotch-Brite Roloc Surface Conditioning Disc, SC-DR, A/O Medium, TR, 3/4 in, 7000120983, 200/case
200 × $0.89 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 26136, PPS Series 2.0 Adapter, Type S32, 18 mm Female, 1.5 mm
Thread, 7100135952
1 × $25.96 -
×
Standard Abrasives 725013, Buff and Blend Cross Buff HP, A/O VFN, 1-1/2 in x 1/2 in x 2 Ply x 8-32, 7000046831
50 × $4.73 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
24 × $3.79 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
100 × $1.67 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 20230, Scotch-Seal Metal Sealant 2084, Silver, 5 Gallon Drum (Pail), 7000046344
5 × $198.10 -
×
3M 56038, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 3 in x 7/8 in, Die 300M, 7000000297, 100/Case
100 × $0.51
3M 49380, Die-Cut Sandblast Stencil 519YT, Tan, 30 in x 10 yd, 48 mil, 1 roll per case, Tractor Feed, 7000123989
$346.85
Factory Stock, 7-10 Day Leadtime
3M Die-Cut Sandblast Stencil 519YT features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides greater visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design.
Offers Excellent Blast Resistance and High Adhesion to Stone
Ideal for die-cutting, flatbed and friction fed formats, 3M™ Die-Cut Sandblast Stencil 519YT helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment.
Recommended Applications
- Protects granite, marble and other stone surfaces during blasting operations
It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil’s rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 on axed or frosted surfaces if increased adhesion is desired.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
Related products
