Perfectly Suited for Stucco
Our 3M™ Outdoor Masking Poly Tape 5903 is a multipurpose tape that has proven to work especially well when applied to stucco and other coated exteriors. It is a tape that is sturdy yet removes cleanly to preserve the quality and look of finished work. 3M™ Outdoor Masking Poly Tape 5903 can be used in a variety of masking, patching, bundling and labeling jobs. It removes cleanly from most opaque surfaces up to one month – an important feature that can improve the quality and aesthetic appeal of your finished jobs. Additionally, this UV resistant tape has a conformable backing, adding to its versatility in a range of applications.
Recommended Applications
- Outdoor masking for stucco
- Protecting window and door frames during construction
- Masking sealed masonry or brick
- Patching
- Bundling
- Reinforcing
- Taping/splicing insulation
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
- Hanging polyethylene drapes
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.

Dynabrade 50340 4-1/2"-5" (114 mm-127 mm) Dia. Pistol Grip Depressed Center Wheel Grinder, .7 HP, 11,000 RPM, 5/8"-11 Spindle
Dynabrade 13523 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 4,500 RPM, 5/8"-11 Arbor
Dynabrade 54313 - 3-1/2" (89 mm) Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 92234 1/8" W x 18" L 320 Grit A/O DynaCut Belt, 50/pack
Dynabrade 53686 Muffler Cap
Dynabrade 94990 1/4" Female Composite-Style Coupler with 1/4" Male Plug Assembly
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
Dynabrade 90544 1/2" W x 44" L 60 Grit Z/A DynaCut Belt, 50/pack
Dynabrade 57951 2-7/8" W x 3-1/8" L Non-Vacuum Dynafine Triangular Disc Pad, Hook-Face, Short Nap
Dynabrade 65750 2" x 48" (51 mm x 122 cm) Electric Tool Post Grinder, 3 hp, 3,450 RPM, Wet, 240 V (AC), 1 Phase, 60 Hz
Dynabrade 52935 1/4" Drill, .4 HP, Rear Exhaust, 5,500 RPM
Dynabrade 78663 1/2" Dia. x 1-1/2" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 60 Grit, 100/pack
Dynabrade 53183 Front Bearing Plate
Dynabrade 48420 - 3" Dia. Epic Finish Kit With 48410 Gearless Disc Sander
Dynabrade 64991 2" x 36" (51 mm x 914 mm) Electric Tool Post Grinder (Air Tension), 2 hp, 3,450 RPM, Wet, 230 V (AC), 1 Phase, 60 Hz
Dynabrade 56321 6" Dia. Vacuum Disc Pad, Hook-Face, 52 Holes
Dynabrade 12201 Stockade Reciprocating Filer
Dynabrade 90363 2" W x 34" L 60 Grit Z/A DynaCut Belt, 10/pack
Dynabrade 52289 .7 hp 7 Degree Offset Die Grinder, Front Exhaust, Short Shank, 18,000 RPM, 1/4" Collet
Dynabrade 78116 3/4" W x 34" L Medium NWN DynaBrite Belt, 10/pack
Dynabrade 79108 1/2" W x 12" L 60 Grit DynaCut Premium Ceramic Belts, 50/pack
Dynabrade 57850 3-2/3" W x 7" L Non-Vacuum Dynabug Disc Pad, Vinyl-Face
Dynabrade 69483 6" Extreme Drop-in Motor, 3/32" Orbit
Dynabrade 56354 2-2/3" x 6-7/8" Non-Vacuum Dynabug II Disc Pad, Vinyl-Face
Dynabrade 13061 Arbor Assembly 3/8"-24 Female Thread
Dynabrade 93548 3" Mandrel for Sanding Stars, 8-32 Male Thread
Dynabrade 56090 - 3" (76 mm) Dia. Non-Vacuum Disc Pad, Hook-Face, Long Nap
Dynabrade 57083 Vacuum Adapter
Dynabrade 54202 - 1 1/4" x 6' Exhaust Hose Assembly
Dynabrade 78810 4" Dia. x .020 x 5/8"-11 UNC Roughneck Stringer Bead Twist Wire Wheel, Stainless Steel
Dynabrade 48541 2" Dia. Right Angle Disc Sander, Rear Exhaust, .4 HP, 15,000 RPM
Dynabrade 78843 Controlled Flare End Brush 1/2" Dia. x .020 x 7/8" Steel
Dynabrade Nitro Series NZ1 NitroZip, Eraser Tool
Dynabrade 64652 48" (122 cm) W x 96" (244 cm) L Downdraft Sanding Table, 230 V (AC)
Dynabrade 91718 DynaMesh 5" 240 Grit Hook & Loop Discs, 50 per box
Dynabrade 92777 4" W x 50' L 40 Micron Diamond Microfinishing Film DynaCut Roll
Dynabrade 58418 6" Dia.Two-Hand Dynorbital Random Orbital Sander, Non-Vacuum
Dynabrade 53245 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 8,500 RPM, 5/8"-11 Spindle
Dynabrade 02029 Spindle
Dynabrade 64699 33" (84 cm) W x 60" (152 cm) L Downdraft Sanding Table, 115 V (AC)
Dynabrade 78705 1-1/2" x 8-32 Female Center Thread, Medium, Dynabrite Surface Conditioning Eyelet Star, 50/pack 
