Built for Automotive Aftermarket Work Through and Through
Auto body professionals will recognize the familiar green color of our Scotch® Performance Green Masking Tape 233+. The distinctive green paper backing helps improve visibility for more accurate edge alignment and is highly conformable – it resists breaking even around complex contours of a vehicle, making for fast application and eliminating the need to apply additional tape. But the backing is only one part of our tape design, balanced specifically for superior performance in auto body paint repair and maintenance
The specially formulated adhesive bonds instantly, reducing rework on a variety of surfaces including EPDM. The adhesive resists water and chemicals, making it ideal for use with water or solvent based paint systems with no bleed-through, edge curl or lifting. A primer layer anchors the adhesive to the backing, virtually eliminating transfer to the vehicle surface. The tape removes clean without slivering, which can reduce labor costs.
Our tape also resists temperatures up to 250ºF (121ºC) for up to 30 minutes, making it suitable for longer baking cycles. All of this is built into a very low-profile tape which won’t leave high edges that require extra buffing or rework.
Special Backsize Treatment for Outstanding Results
We add a release coating to the backing of our Scotch® Performance Green Masking Tape 233+ that gives it superior control during unwinding. This means that the tape is much less likely to wrinkle or pull away from the masking paper when used with a paper apron masker, even if the apron is pulled aggressively. This makes for a more accurate mask and eliminates paint blow-by.
Packaged to Help Make Your Shop More Profitable
Even the way we package our Scotch® Performance Green Masking Tape 233+ helps save money and add value to auto body operations. Each 55-meter roll contains about 5 more inches of tape than lower-priced brands. Since our tape resists slivering, there’s no need for the tab at the start of the roll which makes the tape usable from the very start. And we include a coating on the inner core of the roll that releases the last wrap – commonly about 10 inches of tape that is unusable on lower-priced brands. The result is about 15 inches more tape per roll, or about 60 more feet of usable tape per case.
Decades of Science in Every Roll
The consistently sharp, uniform paint lines you get from our Scotch® Performance Masking Tape 233+ are the result of scientific development that began when 3M invented masking tape in 1925. Every layer of our tape – the backing, the primer, the adhesive and the backing saturant – has been carefully designed and developed for superior performance in auto body aftermarket applications.

Dynabrade 52579 4" (102 mm) Dia. Straight-Line 6" (152 mm) Extension Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 15,000 RPM, 3/8"-24 Spindle
Standard Abrasives 853235, S/C Unitized Wheel, 532, 3 in x 1/4 in x 1/4 in, 7000121886
3M 67103, PELTOR Hard Hat Attached Electrically Insulated Earmuffs X4P5E, 10 EA/Case, 7100097429
Standard Abrasives 700624, A/O Straight Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 180, 7100092987
Standard Abrasives 852733, LDW Wheel, 8 in x 1/2 in x 3 in 7S FIN, 7010330344
3M 26122, PPS Series 2.0 Cup, Midi (13.5 fl oz, 400 mL), 7100135960, 2 per carton
Dynabrade 61201 RaptorVac Electric DrumVac Kit, Dual Operator, For Use With Tools
Standard Abrasives 891133, A/O Unitized Wheel, 911, 3 in x 1/8 in x 1/4 in, 7010368297
Dynabrade 52420 3" (76 mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, .5 HP, 20,000 RPM, 3/8"-24 Spindle
Dynabrade 61203 RaptorVac Pneumatic DrumVac Kit, Single Operator, For Use With Tools
Dynabrade 49420 .4 hp Angle-Head Die Grinder, Rear Exhaust, 3,200 RPM, 1/4" Collet
Standard Abrasives 530006, A/O Resin Fiber Disc, 4-1/2 in x 7/8 in 80, 7010369483
Standard Abrasives 853342, GP Plus Wheel, 8 in x 1 in x 3 in 8A MED, 7000121889
Standard Abrasives 890229, S/C Unitized Wheel, 632, 8 in x 1/2 in x 3 in, 7010310368
Standard Abrasives 882115, A/O Unitized Wheel, 821, 2 in x 1/2 in x 1/4 in, 7010310376
Standard Abrasives 863198, Quick Change TR A/O Unitized Wheel, 631, 3 in x 1/4 in, 7010330152
Dynabrade 11462 Dynabelter Finisher
Standard Abrasives 726070, A/O C2 Straight Precision Cartridge Roll, 5/8 in x 2-1/2 in x 1/4 in 60, 7100098797
Standard Abrasives 853193, Deburring Wheel 6 in x 1 in x 1 in 8S FIN, 7000046730
Standard Abrasives 863225, Quick Change Silicon Carbide Unitized Wheel, 632, Soft/Medium 6S Fine, TSM, 3 in x 1/4 in, 7100142463
Standard Abrasives 800025, Mini Cross Buff Kit, 7000121826
Standard Abrasives 854353, General Purpose Plus Convolute Wheel, 9S Fine, 8 in x 1 in x 3 in, 7000046901
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
Standard Abrasives 890194, S/C Unitized Wheel, 632, 12 in x 1/4 in x 1-1/4 in, 7010367081 