Built for Automotive Aftermarket Work Through and Through
Auto body professionals will recognize the familiar green color of our Scotch® Performance Green Masking Tape 233+. The distinctive green paper backing helps improve visibility for more accurate edge alignment and is highly conformable – it resists breaking even around complex contours of a vehicle, making for fast application and eliminating the need to apply additional tape. But the backing is only one part of our tape design, balanced specifically for superior performance in auto body paint repair and maintenance
The specially formulated adhesive bonds instantly, reducing rework on a variety of surfaces including EPDM. The adhesive resists water and chemicals, making it ideal for use with water or solvent based paint systems with no bleed-through, edge curl or lifting. A primer layer anchors the adhesive to the backing, virtually eliminating transfer to the vehicle surface. The tape removes clean without slivering, which can reduce labor costs.
Our tape also resists temperatures up to 250ºF (121ºC) for up to 30 minutes, making it suitable for longer baking cycles. All of this is built into a very low-profile tape which won’t leave high edges that require extra buffing or rework.
Special Backsize Treatment for Outstanding Results
We add a release coating to the backing of our Scotch® Performance Green Masking Tape 233+ that gives it superior control during unwinding. This means that the tape is much less likely to wrinkle or pull away from the masking paper when used with a paper apron masker, even if the apron is pulled aggressively. This makes for a more accurate mask and eliminates paint blow-by.
Packaged to Help Make Your Shop More Profitable
Even the way we package our Scotch® Performance Green Masking Tape 233+ helps save money and add value to auto body operations. Each 55-meter roll contains about 5 more inches of tape than lower-priced brands. Since our tape resists slivering, there’s no need for the tab at the start of the roll which makes the tape usable from the very start. And we include a coating on the inner core of the roll that releases the last wrap – commonly about 10 inches of tape that is unusable on lower-priced brands. The result is about 15 inches more tape per roll, or about 60 more feet of usable tape per case.
Decades of Science in Every Roll
The consistently sharp, uniform paint lines you get from our Scotch® Performance Masking Tape 233+ are the result of scientific development that began when 3M invented masking tape in 1925. Every layer of our tape – the backing, the primer, the adhesive and the backing saturant – has been carefully designed and developed for superior performance in auto body aftermarket applications.

3M 49833, Multi-Purpose Duct Tape 3900, Black, 48 mm x 54.8 m, 7.7 mil, 7000148383
3M 43474, Glass Cloth Tape 3615, White, 1 in x 36 yd, 7 mil, 7000048876
Standard Abrasives 713286, Mandrel, 1/4 in x 1/4 in x 2 in DM-7, 7000121806
Standard Abrasives 530205, A/O Resin Fiber Disc, 7 in x 7/8 in 60, 7010310605
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
Dynabrade 94992 1/4" Male Composite-Style Coupler with 1/4" Male Plug Assembly
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
3M 07591, Outdoor Masking Poly Tape 5903, Red, 5 in x 60 yd, 7.5 mil, 7010334725
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
Standard Abrasives 710870, Cartridge Roll Mandrel, 1/8 in x 1/2 in x 1/4 in x 1-1/4 in x 2-1/4 in CM-7, 7000121794
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
Dynabrade 51812 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 3/32" Collet
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
Dynabrade 51862 .4 hp Trim Router (Complete), 30,000 RPM, 1/4 Collet
Dynabrade 95677 1/4" Male Plug with 1/4" NPT Female Thread
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
Dynabrade 14360 Pneumatic Pipe Belt Finisher
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
Dynabrade 51857 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
ACS CX1250 Diamond Belt, 1/2" X 24" 74u
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle, RightAngle, 7000058900
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
3M 53034, 663FC, 3/4" X 90", 20u, Diamond Trizact Belt 7100205969
3M 95723, Scotch Automotive Cloth Tape 06980, Olive, 50.8 mm x 18.2 m, 7010312582
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 47838, EMI Copper Foil Shielding Tape 1181, 23 in x 18 yd (58.42 cm x 16.5 m), 7000058121
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
Dynabrade 51702 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 3/32" Collet
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
Air Turbine Tools 310RSV - 6mm Router Hand Tool Series, 25,000RPM, 33421
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M 06504, Marine Adhesive Sealant 5200, Black, 295 mL Cartridge, 7000042727, 12/Case
3M 85653, Thermosetable Glass Cloth Tape 3650, White, 5 in x 60 yd, 8.3 mil, 7010334203
3M 62818, Adhesive Sealant 760 UV, Black, 600 mL Sausage Pack, 7000121496, 12/Case
3M 64070, Contractor Grade Pro Strength Duct Tape 3979, Silver, 1.88 in x 60 yd, 7010375912
3M 05576, Stikit Disc Pad, Blue, 6 in x 3/4 in, 5/16-24 External, 7000045680
3M 82511, Steel Mesh Faceshield Screen W96MW 82511-00000, with Clear Eyeshield, Headgear Not Included 10 EA/Case, 7000127231
Dynabrade 51756 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
3M 50013, Venture Tape Cloth Duct Tape 1500, Silver, 72 mm x 55 m (2.83 in x 60.1 yd), 7010337384
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 27008, 642WY, 3" X 30", 50000 Mesh, Diamond Cloth Belts, 7010533172
3M 49941, Roloc Disc 361F, 80 YF-weight, TSM, 3 in, Die RS300VM, 7000148151 