A Venture Tape Unlike Any Other
A high quality polyethylene cloth tape coated with a natural rubber pressure sensitive adhesive system, our 3M™ Venture Tape™ High Performance Cloth Duct Tape 1556 has extremely high tack, high peel and adheres to corners and irregular surfaces. The polyethylene-coated, cloth-reinforced backing conforms to curved surfaces and resists moisture and humidity while the natural rubber adhesive gives you instant stick and long-term hold. The tape tears easily, across or down, without curling. It is removable with little or no adhesive residue up to three months after application. It measures 12 mil thick and is capable of stretching up to 15 percent beyond its original length.
Recommended Applications
- Patching
- Reinforcing
- Tabbing
- Taping/splicing insulation
- Capping pipe
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
Built to Stick
3M’s family of rugged cloth and duct tapes adheres to most surfaces for applications ranging from bundling to moisture proofing, sealing to splicing, reinforcing to hanging poly drapes. Available in a variety of colors and strengths, they’re known best for their hand tearability, high tensile strength and conformability.

Dynabrade 15349 Contact Wheel Ass'y, 2" Dia. x 1" W x 5/8" I.D., Flat Face, 90 Duro Rubber
Dynabrade 78598 3/8" Dia. x 2" W x 1/8" Center Hole, 60 Grit, 100/pack
Dynabrade 40752 Switch Button
Dynabrade 31968 Conductive Y Adapter
Dynabrade 61202 RaptorVac Pneumatic DrumVac Kit, Single Operator, General Purpose
Dynabrade 02587 Needle Bearing
Dynabrade 52660 1 hp Straight-Line Die Grinder, Rear Exhaust, 950 RPM, 1/4" Collet
Dynabrade 79874 3" 600 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
Dynabrade 58514 2-3/4" W x 7-3/4" L Dynabug II Orbital Sander, Non-Vacuum, .11 hp, 8,000 RPM, 3/16" Orbit
Dynabrade 52433 4" (102 mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Rear Exhaust, .7 HP, 20,000 RPM, 3/8"-24 Spindle
Dynabrade 59186 6" Self Gen Vac Ready Dynorbital Spirit Random Orbital Sander, 3/32" Orbit
Dynabrade 52638 4-1/2" (114 mm) Dia. Right Angle Depressed Center Wheel Grinder
Dynabrade 56715 .4 hp Right Angle Die Grinder, Central Vacuum, 12,000 RPM, 1/4" Collet
Dynabrade 52700 3" (76 mm) Dia. 7 Degree Offset Depressed Center Wheel Grinder, .7 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 96569 5/16" Gray Hose, 200 PSI
Dynabrade 32016 55 Gallon Drum
Dynabrade 51632 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
Dynabrade 48420 - 3" Dia. Epic Finish Kit With 48410 Gearless Disc Sander
Dynabrade 59508 Dynorbital-Spirit Drop-In Motors (10 Pack)
Dynabrade 01247 Speed Regulator
Dynabrade 92100 3" W x 10-11/16" L 40 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 53244 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 7,200 RPM, 5/8"-11 Spindle 
