General purpose tape to protect plastic and metal chutes, guide rails and containers from wear
An Effective Solution for Many Noise and Vibration Problems
3M™ UHMW-PE Film Tape 5421 (PDF, 166.41 Kb) is often used in general industrial applications to help control squeaks and rattles due to vibration or wear of metal and plastic materials. This UHMW-PE (ultra-high molecular weight polyethylene) film tape provides good chemical resistance and excellent abrasion resistance that helps ensure a long wear life. 3M™ UHMW-PE Film Tape 5421 is mounted on a liner, making it easy to die-cut to meet the demands of specific applications. It is ideal for applications requiring a low coefficient of friction and the movement of parts and/or materials. This slick surface tape is primarily used in aerospace, automotive, printing and MRO industries.
Recommended Applications
- Conveyor guide rails and chutes
- Spray booth liners
- Tank and bin liners
- Drawer and cabinet slides
- Protecting aluminum sheets on stretch forming presses

The Science Behind Our Tape
The effectiveness of 3M™ UHMW-PE Film Tape 5421 lies in its Ultra-High Molecular Weight polyethylene (UHMW-PE) backing. UHMW-PE is a thermoplastic that has a unique combination of properties, such as exceptional hardness and low surface energy. The ultra-high molecular weight of this tape significantly reduces friction to create an effective solution for anti-stick and easy-release requirements. The abrasion resistance of UHMW-PE is greater than PTFE and increases as the molecular weight increases.
The extraordinary durability and versatility of UHMW-PE is used by designers and engineers in many industries worldwide. UHMW-PE based products offer a host of exceptional attributes that include high abrasion resistance, low coefficient of friction and one of the highest impact strength ratings of any thermoplastic. These attributes make them ideal for tough impact wear or sliding applications. The low coefficient of friction characteristic is surpassed only by PTFE; however, UHMW-PE tape has superior abrasion resistance. Our exceptional science and engineering of products provide long-lasting performance and successful solutions.

Dynabrade 79143 1/8" W x 24" L 80 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade 52987 3/8" Drill, .4 HP, Rear Exhaust, 1,000 RPM
Dynabrade 25398 Housing Assembly for 54785
Dynabrade 96480 Tune-Up Kit
Dynabrade 58441 5" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, .45 HP, 900 RPM, Hook-Face Pad
Dynabrade 32011 "Y" Inlet
Dynabrade 52211 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Short Shank, 30,000 RPM, 1/4" Collet
Dynabrade 47801 .4 hp Right Angle Die Grinder, Front Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
Dynabrade 54343 .7 hp Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
Dynabrade 54359 .7 hp Right Angle Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
Dynabrade 67222 Mini Arm Ass'y, 5/16" Dia. x 5/8" W, Steel
Dynabrade 54427 4" Dia. Right Angle Disc Sander, Steel Housing, Rear Exhaust, .7 HP, 12,000 RPM, 3/8"-24 Thread
Dynabrade 96580 - 2" to 1-1/4" Vacuum Hose Reduction Assembly
Dynabrade 78719 3/4" x 1-1/8"-A5 Dynacut A/O Mounted Point, 5/pack
Dynabrade 51742 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 3mm Collet, w/ Mounted Stem
Dynabrade 54347 .7 hp Extended Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
Dynabrade 40326 Dynafile II Abrasive Belt Tool for 20-1/2" Belts
Dynabrade 54742 3" (76 mm) Dia. Extended Right Angle Type 1 Cut-Off Tool, Steel Housing, .7 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 52710 2" (51 mm) Dia. Right Angle Depressed Center Wheel Grinder, .4 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 10850 DynaPen Reciprocating Tool Versatility Kit, 14,000 SPM, 1/8" Collet
Dynabrade 54194 Muffler Cap
Dynabrade 48317 .4 hp Right Angle Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 51863 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet 