-
×
Dynabrade 79969 5" Dia. x 60 Grit Non-Vacuum Hook-Face DynaCut Disc, 100/Box
1 × $52.54 -
×
Dynabrade 14062 Contact Wheel, 2" Dia. x 2" W x 1-1/8" I.D., Crown Face, 70 D Urethane
1 × $393.58 -
×
Dynabrade 79929 6" Dia. x 150 Grit Vacuum PSA DynaCut Disc, 100/Pack
1 × $49.02 -
×
Dynabrade 64002 SuperFinisher, 230 Volts (AC), 1 Phase, 50 Hz
1 × $14,467.64 -
×
Dynabrade 02029 Spindle
1 × $121.53 -
×
Dynabrade 97813 V-Ring Seal
1 × $21.73
-
×
Dynabrade 97573 - 1/4" Safety Female Coupler w/Female Plug
1 × $33.47 -
×
Dynabrade 54767 3" (76 mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, .7 HP, 18,000 RPM, 3/8"-24 Spindle
1 × $957.00 -
×
Dynabrade 91255 8" Dia. x 150 Grit A/O Vacuum Hook-Face DynaCut Disc, 25/Box
25 × $3.68
3M 07577, UHMW Film Tape 5423, Transparent, 1 in x 18 yd, 12 mil, 9 rolls percase, 7000029146
$119.64
Factory Stock, 7-10 Day Leadtime
3M UHMW-PE Film Tape 5423 is a thick, general-purpose polyethylene tape made for high-impact, abrasion, and sliding applications. Its UPMW-PE (ultra-high molecular weight polyethylene) thermoplastic backing enables its low-friction and resistance to chemicals, abrasion, and vibration in demanding situations. The exceptional hardness and slick surface is ideal for maintaining a gliding, ‘slip-plane’ effect and reducing noises like squeaks and rattles. Furthering its workability, 3M UHMW-PE Film Tape 5423 is mounted on a liner, allowing the user to die-cut shapes to exact specifications. Between its low-friction coefficient, built-in liner, and long-lasting protection, this slick-surfaced tape excels in the aerospace, automotive, printing, and MRO industries.
An Effective Solution for Many Noise and Vibration Problems
3M™ UHMW-PE Film Tape 5423 is often used in general industrial applications to help control squeaks and rattles due to vibration or wear of metal and plastic materials. This UHMW-PE (ultra-high molecular weight polyethylene) film tape provides good chemical resistance and excellent abrasion resistance that helps ensure a long wear life. 3M™ UHMW-PE Film Tape 5423 is mounted on a liner, making it easy to die-cut to meet the demands of specific applications. It is ideal for applications requiring a low coefficient of friction and the movement of parts and/or materials. This slick surface tape is primarily used in aerospace, automotive, printing and MRO industries.
Recommended Applications
- Flat conveyor guide rails and chutes
- Spray booth liners
- Tank and bin liners
- Drawer and cabinet slides
- Protecting aluminum sheets on stretch forming presses
The Science Behind Our Tape
The effectiveness of 3M™ UHMW-PE Film Tape 5423 lies in its Ultra-High Molecular Weight polyethylene (UHMW-PE) backing. UHMW-PE is a thermoplastic that has a unique combination of properties, such as exceptional hardness and low surface energy. The ultra-high molecular weight of this tape significantly reduces friction to create an effective solution for anti-stick and easy-release requirements. The abrasion resistance of UHMW-PE is greater than PTFE and increases as the molecular weight increases.
The extraordinary durability and versatility of UHMW-PE is used by designers and engineers in many industries worldwide. UHMW-PE based products offer a host of exceptional attributes that include high abrasion resistance, low coefficient of friction and one of the highest impact strength ratings of any thermoplastic. These attributes make them ideal for tough impact wear or sliding applications. The low coefficient of friction characteristic is surpassed only by PTFE; however, UHMW-PE tape has superior abrasion resistance. Our exceptional science and engineering of products provide long-lasting performance and successful solutions.
Related products
