Tape that Withstands
3M™ Thermosetable Glass Cloth Tape 365 is a white, 8.3 mil (0.20 mm) glass cloth tape with thermosetable rubber resin adhesive. It is designed for splicing textured surfaces, especially those materials which might require high tensile strength at elevated temperatures. The conformable backing provides high tensile strength and good solvent resistance. It will not shrink or rot, and is tough and durable with superior abrasion and puncture resistance. This tape will perform at high temperatures (up to 450°F/232°C).
Recommended Applications
- Splicing and insulating applications requiring high tensile strength at elevated temperatures
- As a corrosion resistant wrap on stainless steel hot air ducts
- Splicing materials with rough surfaces or poor internal strength such as roofing felt, fiberglass or textiles
Heat Enhanced Adhesive
3M™ Thermosetable Glass Cloth Tape 365 features a rubber resin adhesive that provides good initial adhesion and high tack. When subjected to a thermosetting cycle it will cross-link, providing greater adhesion and bonding, higher solvent resistance and higher heat resistance. Thermosetting is frequently achieved by ironing or heating the backing once the tape is applied. High adhesion is obtained by optimizing the time, temperature and pressure of the heat applied.

Dynabrade 69360 Composite Throttle Lever, For 3/16" (5 mm) Dia. Orbit Models
Insize MLP-MP53-U, MOUNTING PRESSES (ADVANCED TYPE), 6940561981742
Dynabrade 53556 Spindle
Dynabrade 78469 2" Dia. x 1", 1/4-20 Female Center Thread, A/O, 60 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
Dynabrade 80057 Motor Brush Set, 110/120V-60 Hz
Air Turbine Tools 2545SSVF - 1/4" Angle Hand Tool Series (Short Version, Front Exhaust), 40,000 RPM, 35548
Dynabrade 95600 Tune-Up Kit for .5 hp Motor
Dynabrade 94821 - 3/8" ID, 10' Long Air Hose Assembly, Female/ Male Fitting Ends Included
Dynabrade 51511 Industrial RED-TRED Eraser Disc Tool
Dynabrade 54791 4" (102 mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, Steel Housing, .7 HP, 13,500 RPM, 3/8"-24 Spindle
Dynabrade 79033 1/2" W x 18" L 120 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 01011 Vane Set (4pk)
Dynabrade 92248 4" Dia. x 1/2" W Bent Coarse Wire Wheel
Dynabrade 78739 5/16" x 5/8"- B53 DynaFire A/O Vitrified Mounted Point, 5/pack
Dynabrade 11239 Contact Arm Ass'y, 5/16" Dia. x 3/8" W, Steel Wheel, H.D. Version of 11213 Arm
3M 11156, Scotchrap Vinyl Corrosion Protection Tape 50, 2 in x 100 ft,Unprinted, Black, 10 rolls/Case, 7000057502
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
Dynabrade 52630 4" (102 mm) Dia. Right Angle Depressed Center Wheel Grinder, 1.3 HP, 13,500 RPM, 3/8"-24 Spindle 
