Tape that Withstands
3M™ Thermosetable Glass Cloth Tape 365 is a white, 8.3 mil (0.20 mm) glass cloth tape with thermosetable rubber resin adhesive. It is designed for splicing textured surfaces, especially those materials which might require high tensile strength at elevated temperatures. The conformable backing provides high tensile strength and good solvent resistance. It will not shrink or rot, and is tough and durable with superior abrasion and puncture resistance. This tape will perform at high temperatures (up to 450°F/232°C).
Recommended Applications
- Splicing and insulating applications requiring high tensile strength at elevated temperatures
- As a corrosion resistant wrap on stainless steel hot air ducts
- Splicing materials with rough surfaces or poor internal strength such as roofing felt, fiberglass or textiles
Heat Enhanced Adhesive
3M™ Thermosetable Glass Cloth Tape 365 features a rubber resin adhesive that provides good initial adhesion and high tack. When subjected to a thermosetting cycle it will cross-link, providing greater adhesion and bonding, higher solvent resistance and higher heat resistance. Thermosetting is frequently achieved by ironing or heating the backing once the tape is applied. High adhesion is obtained by optimizing the time, temperature and pressure of the heat applied.

Dynabrade 79242 5" Dia. x 180 Grit A/O Non-Vacuum PSA DynaCut Disc, 100/Roll
Dynabrade 91434 1/4" W x 24" L 60 Grit A/O DynaCut Belt, 50/pack
Dynabrade 50938 Pin
Dynabrade 40734 Spindle Lock Assembly
Dynabrade 57404 2-3/4" W x 8" L Dynaline Sander, Central Vacuum
Dynabrade 57088 Bearing
Dynabrade 52986 3/8" Drill, .4 HP, Rear Exhaust, 500 RPM
Dynabrade 12128 Valve Spring
Dynabrade 51307 .5 hp Straight-Line Die Grinder, Rear Exhaust, 24,000 RPM, 1/4" Collet
Dynabrade 98264 - 3/8" NPT Female Plug
Dynabrade 90707 5" Dia. x 3" W, 36 Grit, Z/A DynaCut Band, 10/pack
Dynabrade 79403 4-1/4" Dia. x 4" W x 5/8"-11 Center Thread, Very Fine, DynaBrite Surface Conditioned Flap Roll
Dynabrade 52835 1/4" Drill, .4 HP, Rear Exhaust, 5,500 RPM
Dynabrade 53783 Cone or Plug Grinder (Single Extension), Steel Housing, 20,000 RPM, 3/8"-24 Male Thread Spindle
Dynabrade 01797 Exhaust Cover
Dynabrade 56727 .4 hp 7 Degree Offset Die Grinder, Central Vacuum, 5,000 RPM, 1/4" Collet
Dynabrade 59467 Dynorbital-Spirit Drop-In Motors (10 Pack) with Repair Tools Included
Dynabrade 11394 DF II Contact Arm Ass'y, 24" Belt Offset
Dynabrade 64492 36" (91 cm) W x 72" (183 cm) L Downdraft Sanding Table, 220 V (AC)
Dynabrade 96334 Plug 
