Tape that Withstands
3M™ Thermosetable Glass Cloth Tape 365 is a white, 8.3 mil (0.20 mm) glass cloth tape with thermosetable rubber resin adhesive. It is designed for splicing textured surfaces, especially those materials which might require high tensile strength at elevated temperatures. The conformable backing provides high tensile strength and good solvent resistance. It will not shrink or rot, and is tough and durable with superior abrasion and puncture resistance. This tape will perform at high temperatures (up to 450°F/232°C).
Recommended Applications
- Splicing and insulating applications requiring high tensile strength at elevated temperatures
- As a corrosion resistant wrap on stainless steel hot air ducts
- Splicing materials with rough surfaces or poor internal strength such as roofing felt, fiberglass or textiles
Heat Enhanced Adhesive
3M™ Thermosetable Glass Cloth Tape 365 features a rubber resin adhesive that provides good initial adhesion and high tack. When subjected to a thermosetting cycle it will cross-link, providing greater adhesion and bonding, higher solvent resistance and higher heat resistance. Thermosetting is frequently achieved by ironing or heating the backing once the tape is applied. High adhesion is obtained by optimizing the time, temperature and pressure of the heat applied.

Dynabrade 25208 Housing Ass'y for Model 52639
Dynabrade 78672 5/8" Dia. x 1-1/2" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 120 Grit, 100/pack
Dynabrade 31968 Conductive Y Adapter
Dynabrade X51S 5" Dia. Non-Vacuum Dynorbital_ Extreme Random Orbital Sander, PSA W/ Speed Regulator
Dynabrade 52675 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 9,000 RPM, 1/4" Collet
Dynabrade 81005 2" W x 42" L 80 Grit A/O DynaCut Belt, 10/pack
Dynabrade 48360 .4 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 13501 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 1,800 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Dynabrade 56182 6" Dia. Non-Vacuum Disc Pad, Hook-Face Short Nap
Dynabrade 13507 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 4,500 RPM, 1/2" (13 mm) Dia. Arbor
Dynabrade 93338 Carbide Burr, 3/32" Dia., SA-42 D/C Burr, Cylinder, 7/16" Flute L, 1/8" Shank
Dynabrade 15336 Rubber Drive Wheel
Dynabrade 64985 Replacement Pre-Filter Blanket
Dynabrade 93172 4" Dia. X 1/4" Dia. Shank, 320 Grit, A/O, Spindle-Mount Sanding Star
Dynabrade 98271 1/2" NPT Male Plug
Dynabrade 15006 Mini-Dynafile II Abrasive Belt Tool Versatility Kit
Dynabrade 96353 Punch Set (8 Pc)
Dynabrade 90190 1-1/2" W x 15-1/2" L 40 Grit A/Z DynaCut Belt, 50/pack 
