Identify, Mark and Organize
Our Scotch® Printable Flatback Paper Tape 256 can be used for masking and general holding, bundling and splicing applications, however it’s specifically designed for operations requiring colors or marking for identifications. It works best on papers, films, fabrics and yarns. This tape is easily marked and written on and works well in many graphic arts applications. The colored flatback paper backing tears by hand while minimizing slivering, making the tape easy to manipulate and apply.
Recommended Applications
- Light to medium bundling applications
- Banding items where color coding is required
- Last lap end roll tabbing of paper, film, fabric and yarns
- Banding, sealing, tabbing, defect flagging and holding applications where color for identification or coding is desired
- General light duty holding applications
Easy Attachment, Easy Removal
Scotch® Printable Flatback Paper Tape 256 features a rubber adhesive that instantly adheres to a wide variety of surfaces. It detaches easily and provides clean removal from a variety of substrates allowing it to be used in painting applications. The flatback paper backing is printable and features good tensile strength. This tape is ideal for use in temperatures up to 200°F/93°C.
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. The backing, typically crepe paper, sticks when applied to curved and irregular surfaces without lifting or curling. Various masking tapes are designed for different applications and should be removed within their specified time range. A very thin or poorly manufactured tape may splinter or shred when coming off the roll or being removed after use.
Our masking tapes adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. These products hand tear for tool-free application. Some have sufficient tensile strength for light commercial and industrial applications, making them useful for bundling, labeling, sealing, temporary repairs, lane marking, splicing, and surface protection. The classic crepe paper masking tape is a light tan color, but Scotch® masking tapes come in a variety of other colors and formulations to meet general and specific applications. It should be noted that many crepe paper masking tapes perform best for indoor purposes and may be difficult to remove after exposure to sunlight. Many of these tapes also have a shelf life of 12 months, beyond which, peak performance cannot be assured. A roll of masking tape is a basic toolbox or supply room item in any construction, warehousing, military, marine, shipping, or retail industry.

Dynabrade 46002 .4 hp Right Angle Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Standard Abrasives 890192, S/C Unitized Wheel, 632, 12 in x 1 in x 1-1/4 in, 7010330303
Standard Abrasives 727398, Buff and Blend Cross Buff HS, A/O Coarse, 2 in x 3/4 in x 2 Ply x 1/4-20, 7010369357
Dynabrade 57127 3" (76 mm) Dia. Right Angle Depressed Center Wheel Grinder, Steel Housing, .55 HP, 15,000 RPM, 3/8"-24 Spindle
Standard Abrasives 706317, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 100, 7100080010
Standard Abrasives 709813, A/O Straight Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 120, 7100092266
Standard Abrasives 854793, Deburring Wheel, 8 in x 1/2 in x 3 in 9S FIN, 7010330359
Standard Abrasives 852435, S/C Unitized Wheel, 524, 3 in x 1/4 in x 1/4 in, 7100018773
Dynabrade 32010 Dolly for RaptorVac DrumVac Kits
Standard Abrasives 530008, A/O Resin Fiber Disc, 4-1/2 in x 7/8 in 120, 7010331426
Standard Abrasives 260013, Cross Buff Kit 260013, 7000121667
Standard Abrasives 853235, S/C Unitized Wheel, 532, 3 in x 1/4 in x 1/4 in, 7000121886
Dynabrade 95848 Dynabrade Gear Oil
Standard Abrasives 873275, S/C Unitized Wheel, 732, 6 in x 1/2 in x 1 in, 7010330312
ACS Diamond Cloth Belt, CX1250 1" X 42" 200U
ACS 2" Diamond Roloc Disc, 100 Mesh, W/ Plastic Button
Standard Abrasives 853353, GP Plus Wheel, 8 in x 1 in x 3 in 8S FIN, 7000046898
Dynabrade DAQ5 5" Dia. National Detroit Dual-Action Sander, Non-Vacuum
3M 26015, PPS Series 2.0 Adapter, Type S8, 12 mm Male, 1.0 mm Thread, 7100135931
Standard Abrasives 845411, Surface Conditioning FE Disc, 4 in CRS, 7010368484
Standard Abrasives 850375, GP Wheel, 8 in x 1/2 in x 3 in 9S FIN, 7010330911
Standard Abrasives 877031, Unitized Mounted Point, 811 W185 x 1/8 in, 3M 7000121920
Standard Abrasives 877012, Unitized Mounted Point, 731 A21 x 1/4 in, 3M 7100074611 
