-
×
Dynabrade 18426 Vane Set (4pk)
1 × $20.20 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
4 × $385.42 -
×
Dynabrade 95848 Dynabrade Gear Oil
3 × $12.98 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
2 × $28,988.00 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
Dynabrade 51451 5"-8" Dia. 7 Degree Offest Two-Hand Rotary Buffer, .7 hp, 4,500 RPM, Rear Exhaust, 5/8"-11 Spindle Thread
1 × $926.00 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
2 × $1,012.00 -
×
Dynabrade 78106 3" Dia. x 120 Grit A/Z DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $2.41 -
×
3M 84164, Hookit Microfinishing Film Disc 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7100015070, 500 ea/Case
500 × $1.34 -
×
Dynabrade 55204 Vane Set (4pk)
1 × $39.08 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Dynabrade 01185 Vane Set (4pk)
1 × $26.54
-
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Norton 66623335427, 2" Dia Vortex Rapid Prep Quick-Change Non-Woven Abrasive Disc, Medium Grade, 50 Each
50 × $1.70 -
×
Dynabrade 25234 Vane Set (4pk)
1 × $28.26
3M 02820, Scotch High Performance Masking Tape 213, Tan, 1 in x 60 yd, 6.5 mil, 36/Case, 7000047437
$53.22
Factory Stock, 7-10 Day Leadtime
Scotch High Performance Masking Tape 213 has a comparatively high resistance to heat in masking and holding applications where temperatures reach 350?F/177?C for 30 minutes. It has proven to be among the cleanest to remove when tested across a variety of surfaces. This tape is has the ability to exceed clean-removal performance of most tapes on challenging, anodized treated metal surfaces.
High-Temperature Performance
Scotch® High Performance Masking Tape 213 is designed to deliver reliability when exposed to high temperatures, removing cleanly from even the most challenging of surfaces. The specially treated crepe paper backing is sliver resistant and conformable.
Because this tape can withstand high temperatures (up to 30 minutes at 350°F/177°C) it is ideal for use in masking and holding paint bake applications. It bonds and removes cleanly from even the most challenging surfaces, including anodized aluminum.
Recommended Applications
- Painting with high-heat bake cycles
- General use on challenging and sensitive surfaces
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
