-
×
Norton 66261199696 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 7AM U2305, 40 Each
40 × $13.04 -
×
Norton 66623335427, 2" Dia Vortex Rapid Prep Quick-Change Non-Woven Abrasive Disc, Medium Grade, 50 Each
50 × $1.70 -
×
Norton 66261014792 - 2" Medium Grade Aluminum Oxide Bear-Tex Speed-Lok High Strength Maroon TR Non-Woven Abrasive Disc 160 Each
160 × $2.04 -
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $87.98 -
×
Insize 0213-A500, INFRARED THERMOMETER, -58?F~716?F/-50?C~380?C, 6940561934700
1 × $79.29 -
×
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
250 × $1.57 -
×
3M 26015, PPS Series 2.0 Adapter, Type S8, 12 mm Male, 1.0 mm Thread, 7100135931
4 × $27.52 -
×
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
1 × $18.00 -
×
3M 26128, PPS Series 2.0 Adapter, Type S33, 1/8 Female, 27 Thread NPT, 7100135950
1 × $27.52 -
×
Dynabrade 98265 3/8" Female Coupler with 3/8" Male Plug Assembly
1 × $90.88 -
×
Dynabrade 57801 3-2/3" W x 7" L Dynabug Orbital Sander, Vac-Ready, .24 HP, 8,000 RPM, 3/16" Orbit
1 × $577.00 -
×
Dynabrade 78295 3" Dia. x 6A M Medium Type R Unitized Locking-Type Disc, 25/pack
25 × $14.88 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.91 -
×
3M 05009, Utility Cloth Roll 211K, 100 J-weight, 1 in x 50 yd, Full-flex, 7100016843
5 × $64.59 -
×
Dynabrade 58503 3-1/4" W x 5" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $250.00 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
Standard Abrasives 725011, Buff and Blend Cross Buff HP, A/O VFN, 3/4 in x 3/8 in x 2 Ply x 8-32, 7000047134
50 × $4.12 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 19768, Utility Cloth Sheet 314D, 9 in x 11 in P180 J-weight, 7000000356
250 × $1.57 -
×
Dynabrade 48036 1-1/4" Mini Orbital Sander, 8K RPM, .4Hp Right Angle, Front Exhaust
1 × $957.00 -
×
3M 50258, Roloc Disc 777F, 60 YF-weight, TSM, 3 in, Die RS300VM, 7010325551
200 × $1.58
3M 02820, Scotch High Performance Masking Tape 213, Tan, 1 in x 60 yd, 6.5 mil, 36/Case, 7000047437
$53.22
Factory Stock, 7-10 Day Leadtime
Scotch High Performance Masking Tape 213 has a comparatively high resistance to heat in masking and holding applications where temperatures reach 350?F/177?C for 30 minutes. It has proven to be among the cleanest to remove when tested across a variety of surfaces. This tape is has the ability to exceed clean-removal performance of most tapes on challenging, anodized treated metal surfaces.
High-Temperature Performance
Scotch® High Performance Masking Tape 213 is designed to deliver reliability when exposed to high temperatures, removing cleanly from even the most challenging of surfaces. The specially treated crepe paper backing is sliver resistant and conformable.
Because this tape can withstand high temperatures (up to 30 minutes at 350°F/177°C) it is ideal for use in masking and holding paint bake applications. It bonds and removes cleanly from even the most challenging surfaces, including anodized aluminum.
Recommended Applications
- Painting with high-heat bake cycles
- General use on challenging and sensitive surfaces
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
