Flexible Backing Conforms to Duct Piping Systems
3Mā¢Ā ASJ Facing Tape 2C105 is a 7.5 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. It features excellent performance in a range of temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3Mā¢Ā ASJ Facing Tape 2C105 is UL 723 Classified (15/10 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on traditional all service jacket (ASJ) faced duct piping systems
- Vapor seal on traditional ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M⢠ASJ Facing Tape 2C105 is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3M⢠ASJ Facing Tape 2C105 applies easily to various types of thermal insulation, and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to high shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life ā developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives, like 3M⢠ASJ Facing Tape 2C105, to help businesses like yours operate faster, better and more efficiently.

Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
3M 86391, Scotch-Weld EPX 10:1 Plunger for EPX Plus II Applicator, 45 mL, 7010329933
Dynabrade 78768 3" Dia. x 2" W x 1/4" Shank, Medium, NWN DynaBrite Wheel, 10/pack
Dynabrade 14000 Dynafile Abrasive Belt Tool
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 29858, Sanding Screen, 80 grit, 12 in x 18 in, 7100161088
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
Dynabrade 92150 1/2" W x 18" L 80 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
Dynabrade 78513 2" x 1/2", 1/4-20 Female Center Thread, 60 Grit, 8-Ply, Dynacut A/O Square Pad, 100/pack
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
Dynabrade 78055 1" W x 24" L Medium NWN DynaBrite Belt, 10/pack 
