Flexible Backing Conforms to Duct Piping Systems
3Mā¢Ā ASJ Facing Tape 2C105 is a 7.5 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. It features excellent performance in a range of temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3Mā¢Ā ASJ Facing Tape 2C105 is UL 723 Classified (15/10 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on traditional all service jacket (ASJ) faced duct piping systems
- Vapor seal on traditional ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M⢠ASJ Facing Tape 2C105 is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3M⢠ASJ Facing Tape 2C105 applies easily to various types of thermal insulation, and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to high shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life ā developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives, like 3M⢠ASJ Facing Tape 2C105, to help businesses like yours operate faster, better and more efficiently.

Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
Dynabrade 51756 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
Dynabrade 51301 .5 hp Straight-Line Die Grinder
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 15060, Roloc + Button 7, 3/8 in Red, 7000045945
3M 76631, Roloc Disc 777F, TR, 3 in x NH, 36 YF-weight, 7000028339
Dynabrade 14000 Dynafile Abrasive Belt Tool
Dynabrade 53472 Direct Drive Reversible Screwdriver, .5 HP, 450 RPM, 1/4" Hex Drive
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
3M 26018, PPS Series 2.0 Adapter, Type S11, 3/8 Male, 18 Thread NPS, 7100135942
Dynabrade 13017 Arbor Assembly 1/2"-20 Female Thread - 5/8"-11 Male Thread
Norton 66261199696 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 7AM U2305, 40 Each
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
3M 05576, Stikit Disc Pad, Blue, 6 in x 3/4 in, 5/16-24 External, 7000045680
3M 20911, PSA Cloth Disc 348D, 50 X-weight, 2 in x NH, Die 200P, 7000118871
3M 06520, Marine Adhesive Sealant 5200FC Fast Cure, White, 295 mL Cartridge, 7000000629, 12/Case 
