Flexible Backing Conforms to Duct Piping Systems
3M™ Venture Tape™ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3M™ Venture Tape™ ASJ Facing Tape 1540CW is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on all service jacket (ASJ) faced duct piping systems
- Vapor seal on ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3M™ Venture Tape™ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

Dynabrade 57500 Palm-Style Mini-Dynorbital Random Orbital Sander
Dynabrade 55388 Collet Guard, Extension Version
Dynabrade 56800 3-1/2" Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander, 3/16 Orbit
Dynabrade 32011 "Y" Inlet
Dynabrade 59181 6" Dia. Dynorbital-Spirit Random Orbital Sander, Central Vacuum, 3/8" Orbit
Dynabrade 13512 Dynastraight 6" (152 mm) Extension Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 1/2" (13 mm) Dia. Arbor
Dynabrade 90255 3/4" W x 18" L 220 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 11329 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, with 1/2" W Platen - 17" Reach
Dynabrade 42733 Carbon Brush
Dynabrade 78578 5" Dia. x 1/4"-20 Female Center Thread, 180 Grit, A/O, 3-Ply, J-DynaCut Eyelet Star, 50/pack
Dynabrade 30420 Housing
Dynabrade 45294 Drop-In Motor
Dynabrade 92201 1-1/2" W x 30" L 60 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 45206 Housing for Model 55126
Dynabrade 79059 1/4" W x 24" L 120 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 78869 Concave Brush 2" Dia. x .008 x 1/2" Steel
Dynabrade 93658 3" Dia. x 3/8" CH 40/50 Grit Gulleted/Slotted Diamond Cut-Off Wheel
Dynabrade 91629 1-1/2" W x 24" L 320 Grit A/O DynaCut Belt, 10/pack
Dynabrade 51753 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
Dynabrade 56853 5" Dia. Self-Generated Vacuum Dynorbital Supreme Random Orbital Sander, 3/32" Orbit
Dynabrade 78007 1/2" W x 12" L Medium Non-Woven DynaBrite Belts, 10/pack
Dynabrade 01044 Drop-In Motor
Dynabrade 90433 1/4" W x 24" L Medium NWN DynaBrite Premium Belt, 10/pack
Dynabrade 62347 Interface Ring
Dynabrade 96359 Pliers
Dynabrade 13204 Dynastraight Finishing Tool, .7 HP, Rear Exhaust, 3,400 RPM, 5/8"-11 Arbor
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Dynabrade X52 5" (127 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/32" Orbit, PSA
Dynabrade 40750 Carbon Brush Set 
