Flexible Backing Conforms to Duct Piping Systems
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CWÂ is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on all service jacket (ASJ) faced duct piping systems
- Vapor seal on ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

Dynabrade NS11 11" Dia. Random Orbital Sander, Non-Vacuum
Dynabrade 45225 Sleeve for 48316, 15,000 RPM
Dynabrade 57765 - 6" (152 mm) Dia. Vacuum Gear-Driven Disc Pad, Hook-Face, Short Nap
Dynabrade 50267 4-1/2" Dia. Disc Backing Pad, 5/8"-11 Thread
Dynabrade 02091 Rotor Shaft
Dynabrade 58460 3" Dia. DynaLocke Dual-Action Sander, Non-Vacuum
Dynabrade 52576 3" (76 mm) Dia. Straight-Line 6" (152 mm) Extension Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 15,000 RPM, 3/8"-24 Spindle
Dynabrade 69359 Muffler Body
Dynabrade 96798 Tune-Up Kit
Dynabrade 57981 Turbine Wheel Assembly
Dynabrade 53532 Cone or Plug Grinder (Double Extension), 18,000 RPM, 3/8"-24 Male Thread Spindle
Dynabrade 54744 4" (102 mm) Dia. Right Angle Type 1 Cut-Off Tool, Steel Housing, .7 HP, 13,500 RPM, 3/8"-24 Spindle
Dynabrade 51306 .5 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 01025 O-Ring
Dynabrade 79906 3-1/2" Dia. x 150 Grit A/O Non-Vacuum Hook-Face DynaCut Disc, 100/Pack
Dynabrade 59511 Dynorbital-Spirit Drop-In Motors (10 Pack)
Dynabrade 31949 Vacuum Hose Ass'y, 3/4" Vac, 5/16" Air Hose
Dynabrade Nitro Series RS1 Reciprocating Saw
Dynabrade 53635 Adapter
Dynabrade 11202 Contact Arm Ass'y, 5/8" Dia. x 1/8" W, Rubber Wheel, with 1/4" W Platen
Dynabrade 11424 Spring
Dynabrade 52667 1 hp Straight-Line Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 91968 JH-20 1/4" Vi-Sorb Pad
Dynabrade 51732 .1 hp Straight-Line Pencil Grinder, 50,000 RPM, 3mm Collet
Dynabrade 11054 Shaft
Dynabrade 79188 1/2" W x 18" L 120 Grit DynaCut Premium Ceramic Belts, 50/pack
Dynabrade 48327 .4 hp Straight-Line Die Grinder, Rear Exhaust, 30,000 RPM, 1/4" Collet
Dynabrade 51106 Collet, 5/16"-24 Female Thread, 1/4" Capacity, 4-Piece Collet
Dynabrade 55055 Drop-In Motor 
