Flexible Backing Conforms to Duct Piping Systems
3M™ Venture Tape™ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3M™ Venture Tape™ ASJ Facing Tape 1540CW is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on all service jacket (ASJ) faced duct piping systems
- Vapor seal on ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3M™ Venture Tape™ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

Dynabrade 94487 Hub Assembly
Dynabrade 49445 Extension Polisher, .4 hp, 3,200 RPM, Rear Exhaust
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
Dynabrade 15357 Contact Arm Assembly, 1 Dia. x 2 W, V-Shaped Wheel
Dynabrade 79508 1/4" W x 24" L Premium Coarse Plus NWN DynaBrite Belt,10/pack
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
Dynabrade 82590 2" W x 72" L 40 Grit Ceramic DynaCut Belt, 10/pack
Dynabrade 56315 3" x 4-1/4" Non-Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
Dynabrade 56840 3-1/2" Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander, 3/32" Orbit
Dynabrade 57572 5" Dia. Wet Dynorbital Supreme Random Orbital Sander, Basic, 3/16" Orbit
Dynabrade 56196 5" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 79530 3/4" W x 18" L Premium Very Fine Plus NWN DynaBrite Belt, 10/pack
Dynabrade 79155 1-1/2" W x 30" L 80 Grit Ceramic DynaCut Belt, 10/pack
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Dynabrade 52221 .5 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 18,000 RPM, 1/4" Collet
Dynabrade 90392 2" W x 30" L 320 Grit A/O DynaCut Belt, 10/pack
Dynabrade 31962 - 1-1/4" Dia. x 20' Length Conductive Vacuum Hose Assembly
Dynabrade 92229 1/8" W x 18" L 120 Grit A/O DynaCut Belt, 50/pack
Dynabrade 95591 3/8" NPT Single Pivot Dynaswivel
Dynabrade 90672 1/2" W x 30" L 80 Grit A/O DynaCut Belt, 50/pack
Dynabrade 12995 Universal Shank Arbor, 1/4" Shank
ACS Diamond Grinding Disc, 4-1/2" Dia. X 5/8"-11 Center Hub Thread, Type 29, 36 Grit
Dynabrade 01905 Drop-In Motor
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
Dynabrade 52580 4" (102 mm) Dia. Straight-Line 6" (152 mm) Extension Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 92151 1/2" W x 18" L 120 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 53998 - 11" (279 mm) Dia. x 5-1/2" (140 mm) I.D. Interface Pad, Double-Sided Hook-Face, Short Nap
Dynabrade 58500 3" W x 4-1/4" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
Dynabrade 51391 6"-8" Dia. Right Angle Two-Hand Rotary Buffer, 1 hp, 1,800 RPM, Rear Exhaust, 5/8"-11 Thread
Dynabrade 79011 1/2" W x 12" L 60 Grit A/Z DynaCut Belt, 50/pack
3M 06520, Marine Adhesive Sealant 5200FC Fast Cure, White, 295 mL Cartridge, 7000000629, 12/Case 
