Flexible Backing Conforms to Duct Piping Systems
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CWÂ is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on all service jacket (ASJ) faced duct piping systems
- Vapor seal on ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

Dynabrade 78501 1" x 1/2", 8-32 Female Center Thread, 60 Grit, 8-Ply, Dynacut A/O Square Pad, 100/pack
Dynabrade 78621 3/4" Dia. x 2" W x 1/4" Center Hole, 60 Grit, 100/pack
Dynabrade 65074 Tracking Wheel
Dynabrade 61909 Conductive Recovery Bag
Dynabrade 56198 6" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 51629 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
Dynabrade 50154 - 5" (127 mm) Dia. Disc Wet Back-Up Pad
Dynabrade 78779 1/4" x 3/4"-W164 Dynacut Cotton Fibre Polishing Mounted Point, 120GFX, 10/pack
Dynabrade 94479 Dynacushion Pneumatic Wheel Kit
Dynabrade 91628 1-1/2" W x 24" L 220 Grit A/O DynaCut Belt, 10/pack
Dynabrade 79123 1/2" W x 18" L 60 Grit DynaCut Premium Ceramic Belts, 50/pack
Dynabrade 11321 Contact Arm Ass'y, 7/16" Dia. x 3/8" W, Rubber Wheel, with 1/2" W Platen
Dynabrade 51306 .5 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 96644 Motor Tune-Up Kit for 2.8hp Rebel Series
Dynabrade 53472 Direct Drive Reversible Screwdriver, .5 HP, 450 RPM, 1/4" Hex Drive
Dynabrade 78315 2" Dia. x 1" W x 1/4" Shank, Coarse, NWN DynaBrite Wheel, 10/pack
Dynabrade 01888 Drop-In Motor
Dynabrade 79518 1/2" W x 18" L Premium Very Fine Plus NWN DynaBrite Belt, 10/pack
Dynabrade 57801 3-2/3" W x 7" L Dynabug Orbital Sander, Vac-Ready, .24 HP, 8,000 RPM, 3/16" Orbit
Dynabrade 93245 8" Dia. x 1/2" Center Hole, 120 Grit, A/O, Arbor-Mount Sanding Star
Dynabrade 56237 8" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 57855 3-2/3" W x 7" L Vacuum Dynabug Disc Pad, Vinyl-Face
Dynabrade 57764 - 6" (152 mm) Dia. Non-Vacuum Gear-Driven Disc Pad, Hook-Face, Short Nap
Dynabrade 94808 1/2" W x 72" L 40 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 97571 1/2" NPT Male Safety Coupler
Dynabrade 21832 ND4191, Backing Pad
Dynabrade 52677 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 58455S - 5" (127 mm) Dia. Dynabuffer Random Orbital Polisher
3M 49054, Polyurethane Sealant 540, White, 310 mL Cartridge, 7000000941, 12/Case 
