Flexible Backing Conforms to Duct Piping Systems
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CWÂ is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on all service jacket (ASJ) faced duct piping systems
- Vapor seal on ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

Dynabrade 02435 Housing Assembly for 53242, 6,000 RPM
Dynabrade 78532 3" x 1/4", 1/4-20 Female Center Thread, 120 Grit, 8-Ply, Dynacut A/O Square Pad, 100/pack
Dynabrade 63991 - 4" 90 Dur. Contact Wheel Kit SuperFinisher
Dynabrade 65269 Tension Support
Dynabrade 52438 5" (127 mm) Dia. 7 Degree Offset Vacuum Cut-Off Wheel Tool
Dynabrade 21692 NDDP1060, Pad Plate Grommet
Dynabrade 91073 1" Dia. x 1-1/2" W, 120 Grit, Z/A DynaCut Band, 10/pack
Dynabrade 56196 5" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 56175 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
Dynabrade 92151 1/2" W x 18" L 120 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 90410 1/8" W x 24" L 180 Grit A/O DynaCut Belt, 50/pack
Dynabrade 91115 1/4" W x 18" L 80 Grit A/O DynaCut Belt, 50/pack
Dynabrade 13508 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 4,500 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Dynabrade 78544 1"Dia. 2-Set, 8-32 Female Center Thread, 180 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
Dynabrade 90597 7" W x 10-11/16" L 60 Grit A/O DynaCut Belt, 10/pack
Dynabrade 82529 1/2" W x 12" L 120 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 54771 4" (102 mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, .7 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 95676 1/4" Female Coupler with 1/4" Male Plug Assembly
Dynabrade 52717 Cone or Plug Wheel Grinder, 18,000 RPM, 3/8"-24 Male Thread Spindle
3M 49054, Polyurethane Sealant 540, White, 310 mL Cartridge, 7000000941, 12/Case 
