Flexible Backing Conforms to Duct Piping Systems
3M™ Venture Tape™ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3M™ Venture Tape™ ASJ Facing Tape 1540CW is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on all service jacket (ASJ) faced duct piping systems
- Vapor seal on ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3M™ Venture Tape™ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
Dynabrade 78564 3" Dia. 2-Set, 1/4-20 Female Center Thread, 180 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
Dynabrade 15034 Contact Arm Assembly, 13" Mini-Dynafile II Offset
Dynabrade 79315 5" Dia. x 7/8" Center Hole, 36 Grit, A/O DynaCut Fiber Disc, 25/box
Dynabrade 54730 3" (76 mm) Dia. Right Angle Type 1 Cut-Off Tool, Rear Exhaust, .7 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 51306 .5 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 79005 1/8" W x 12" L 120 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 90613 3" W x 10-11/16" L 60 Grit A/O DynaCut Belt, 10/pack
Dynabrade 92027 2" Dia. x 60 Grit Ceramic DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
Dynabrade 79183 1/8" W x 12" L 120 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade 78556 2" Dia. 2-Set, 8-32 Female Center Thread, 180 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
Dynabrade 57956 4" W x 3/4" L Non-Vacuum Dynafine Raised Panel Disc Pad, Hook-Face, Short Nap
Dynabrade 51472 6"-8" Dia. Right Angle Two-Hand Rotary Buffer, .7 hp, 0-3,100 RPM, Rear Exhaust, 5/8"-11 Spindle Thread
Dynabrade 01044 Drop-In Motor
Dynabrade 78113 2" Dia. x 80 Grit Premium Ceramic Non-Vacuum DynaCut Locking-Type Disc, 25/pack
Dynabrade 53531 Cone or Plug Grinder (Single Extension), 18,000 RPM, 3/8"-24 Male Thread Spindle
Dynabrade 81012 2" W x 42" L 320 Grit A/O DynaCut Belt, 10/pack
Dynabrade 57841 Pad Top Assembly
Dynabrade 77773 5" Dia. x 7/8" Center Hole, 60 Grit, Type 27, Ceramic DynaCut Flap Disc, 10/pack
Dynabrade 94924 Washer
Dynabrade 56257 5" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 97566 1/4" Safety Coupler, Female
Dynabrade 47822 2" Dia. Right Angle Disc Sander
Dynabrade 93660 1-1/2" Dia. x 1/2", 8-32 Female Center Thread, 80 Grit A/O, 8 Ply, J-DynaCut Cross Pad, 100/pack
Dynabrade 56237 8" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 56198 6" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 13205 Dynastraight Finishing Tool, .7 HP, Rear Exhaust, 3,400 RPM, 5/8" or 1" Dia. Arbor
3M 08027, Marine Grade Silicone Sealant, White, 304 mL Cartridge, 7000120476, 12/Case 
