Designed for Vapor Seal Applications
3M™ Venture Tape™ Metal Building Facing Tape 1531CW is flexible and conforms well to irregular surfaces and curves. With superior resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in demanding cold and hot temperature applications. It applies easily to a variety of substrates, including metal, and is easily installed without special tools or application methods.
Recommended Applications
- Vapor seal on various exterior building applications
Adhesive Performs Well in Sub-Zero to Tropical Temperatures
3M™ Venture Tape™ Metal Building Facing Tape 1531CW features a specially formulated cold temperature solvent acrylic adhesive system designed to perform in sub-zero to tropical temperatures. It adheres on contact and applies in temperature ranges from -40°F/-40°C to 185°F/85°C. The tape is UL723 Classified (0/5 Flame/Smoke Rating). This facing meets ASTM C1136 type 11 and IV.
Bringing Better Ideas to the Surface through Science
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

Standard Abrasives 37446, PSA A/O Disc, 700595, 1-1/2 in x NH, 60, 7010331822
Dynabrade 14200 Dynangle Abrasive Belt Tool
ACS Diamond Cloth Belt, CX1250 3" X 90" 45U
Dynabrade 31991 - 3/4" to 1" Vacuum Whip Hose 4" Long w/Swivel Adaptor
Dynabrade 15300 Dynafile III Abrasive Belt Tool
Dynabrade 58365 Tip Valve
Dynabrade 61202 RaptorVac Pneumatic DrumVac Kit, Single Operator, General Purpose
Standard Abrasives 853254, S/C Unitized Wheel, 532, 4 in x 1/4 in x 1/4 in, 7000121888
Standard Abrasives 854793, Deburring Wheel, 8 in x 1/2 in x 3 in 9S FIN, 7010330359
Standard Abrasives 850373, GP Wheel 6 in x 1/2 in x 1 in 9S FIN, 7010299543
Dynabrade 47212 .4 hp 7 Degree Offset Die Grinder, Rear Exhaust, 5,000 RPM, 1/4" Collet
Dynabrade 92740 2" W x 150' L 30 Micron A/O Lapping Film DynaCut Roll
Dynabrade 48335 .4 hp 7 Degree Offset Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
Dynabrade 95848 Dynabrade Gear Oil
ACS CX1250 Diamond Belt, 1/2" X 24" 175u
ACS 2" Diamond Disc, 60 Mesh, W/ Metal Button
Standard Abrasives 890194, S/C Unitized Wheel, 632, 12 in x 1/4 in x 1-1/4 in, 7010367081
Dynabrade 18410 Safety Lever Spring
3M 15996, Venture Tape UL181B-FX Polypropylene Duct Tape 1599B, Silver, 48 mm x 109.7 m, 3 mil, 7100043760
Standard Abrasives 890229, S/C Unitized Wheel, 632, 8 in x 1/2 in x 3 in, 7010310368
Dynabrade 52439 3" (76 mm) Dia. Right Angle Diamond Cut-Off Wheel Tool
Standard Abrasives 811532, Type 27 Unitized Wheel, 532, 4-1/2 in x 1/2 in x 7/8 in, 7000047219
Dynabrade 58900 4-1/2" Dia. Compact Rebel Right Angle Depressed Center Wheel Grinder
Dynabrade 64354 26" x 36" (660 mm W x 914 mm L) Metal Capture Downdraft Station, 460 V (AC)
Dynabrade 56581 Grip-Housing Teal
Dynabrade 47802 .4 hp Right Angle Die Grinder, Front Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 46001 .4 hp Right Angle Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
Standard Abrasives 855853, GP Plus Wheel, 12 in x 2 in x 5 in 10S FIN, 7010368577
Standard Abrasives 898008, Buff and Blend Combi-Wheel, 3 in x 2 in x 1/4 in A MED 60, 7000122259
Dynabrade 01486 Felt Silencer
Dynabrade 52574 4" (102 mm) Dia. Straight-Line Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 51926 Vane Set (4pk)
Dynabrade 52672 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 3,400 RPM, 1/4" Collet
Dynabrade 01564 Air Control Ring
Dynabrade 92738 2" W x 150' L 15 Micron A/O Microfinishing Film DynaCut Roll
3M 14529 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 2 in x 72 in, 7000036295
Dynabrade 64403 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 460 V (AC), Up Exhaust
Dynabrade 64993 2" x 36" (51 mm x 914 mm) Electric Tool Post Grinder (Air Tension), 2 hp, 2,850 RPM, Wet, 230 V (AC), 1 Phase, 50 Hz
Dynabrade 46000 .4 hp Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
Dynabrade 69362 Vacuum Shroud, 5" Orbital
Dynabrade 11462 Dynabelter Finisher
Dynabrade X3252V - 3" Mini Extreme & 5" Extreme Random Orbital Sander, Vac, Combo Kit 12,000 RPM, 3/32" Dia., Rear Exhaust 
