Tri-Directional Reinforced Backing
3M Venture Tape FSK Facing Tape 1525CW is a 5.5 mil tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a foil/scrim/kaft laminated backing coated with a cold weather acrylic adhesive. This backing is flexible and conforms well to irregular surfaces and curves. With superior resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in demanding cold and hot temperature applications. It applies easily to both fibrous and sheet metal ductwork and is easily installed without special tools or application methods.
3M Venture Tape FSK Facing Tape 1525CW is UL723 Classified (10/10 Flame/Smoke Rating). The facing meets ASTM C1136 type II and IV.
Recommended Applications
- Sealing applications for fibrous ductboard, sheet metal ducts and blankets
- Vapor seal for reinforced aluminum faced fiberglass or mineral wool thermal insulation
Ultimate in Cold Weather Tapes
3M Venture Tape FSK Facing Tape 1525CW is coated with a pressure sensitive, cold weather solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. This adhesive features a quick stick at normal temperatures and superior low temperature performance. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesive, like 3M™ Venture Tape™ FSK Facing Tape 1525CW – to help businesses like yours operate faster, better and more efficiently.

Dynabrade 54262 - 3" Vacuum, Hook Pad, .44" Thickness, 1/4"-20 Thread
Dynabrade 54917 Bearing- 47 x 25 x 12
Dynabrade 90400 1/2" W x 24" L Very Fine NWN DynaBrite Premium Belts, 10/pack
Dynabrade 91567 6" Dynacut Extreme Orange Premium Film Disc, 180 Grit, Hook & Loop, Vacuum Holes, 50/Box
Dynabrade 51124 Collet, M8 x 1.0 Female Thread, 1/4" Capacity
Dynabrade 93243 8" Dia. x 1/2" Center Hole, 80 Grit, A/O, Arbor-Mount Sanding Star
Dynabrade 53046 1/4" Drill Right Angle, .4 HP, Rear Exhaust, 12,000 RPM
Dynabrade 50283 7" Dia. Disc Backup Pad, Spiral-Face, Medium Density, 5/8"-11 Thread
Dynabrade 79010 1/2" W x 12" L 40 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 65753 2" x 48" (51 mm x 122 cm) Electric Variable Speed Tool Post Grinder, 3 hp, Wet, 440 V (AC), 3 Phase, 50/60 Hz 