Suitable as an Air and Vapor Barrier
Comprised of a foil/scrim/kraft lamination, 3M™ Venture Tape™ Non-Adhesive FSK Facing 1527 is a tri-directional reinforced facing that combines flexibility and durability. This material is very tough, and resists punctures and tears as well as weathering, mold, UV and environmental conditions. It delivers a perm rating of 0.02, making it suitable for use as an air and vapor barrier with a wide range of applications.
3M™ Venture Tape™ Non-Adhesive FSK Facing 1527 has a 5/10 Flame/Smoke Rating according to ASTM E84.
Recommended Applications
- Vapor seal and air barrier
- For use with reinforced aluminum faced fiberglass, mineral wool and other types of thermal insulation
Efficient Long-Term Installation
3M™ Venture Tape™ Non-Adhesive FSK Facing 1527 applies easily to various types of thermal insulation, and is easily installed without special tools or application methods. The facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to high shear loads.
Better Science for Better Labeling from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial labeling and adhesive products like 3M™ Venture Tape™ Non-Adhesive FSK Facing 1527, to help businesses like yours operate faster, better and more efficiently.

Dynabrade 40752 Switch Button
Dynabrade 64991 2" x 36" (51 mm x 914 mm) Electric Tool Post Grinder (Air Tension), 2 hp, 3,450 RPM, Wet, 230 V (AC), 1 Phase, 60 Hz
Dynabrade 48335 .4 hp 7 Degree Offset Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
Dynabrade 52276 .7 hp Straight-Line Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 66402 Air Tool Post Grinder for 1-1/2" W x 24" L (38 mm x 610 mm) Belts, 1.86 hp, 7,200 RPM, Side Exhaust
Dynabrade 53081 1/2" Right Angle Drill, .7 HP, Rear Exhaust, 4,500 RPM
Dynabrade 57053 Speed Regulator
Dynabrade 52293 .7 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 18,000 RPM, 1/4" Collet
Dynabrade 51301 .5 hp Straight-Line Die Grinder
Dynabrade 43505 .4 hp 3" (76 mm) Extension Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet 
