Tri-Directional Reinforced Backing
3M™ Venture Tape™ FSK Facing Tape 1525CW is a 5.5 mil tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a foil/scrim/kaft laminated backing coated with a cold weather acrylic adhesive. This backing is flexible and conforms well to irregular surfaces and curves. With superior resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in demanding cold and hot temperature applications. It applies easily to both fibrous and sheet metal ductwork and is easily installed without special tools or application methods.
3M™ Venture Tape™ FSK Facing Tape 1525CW is UL723 Classified (10/10 Flame/Smoke Rating). The facing meets ASTM C1136 type II and IV.
Recommended Applications
- Sealing applications for fibrous ductboard, sheet metal ducts and blankets
- Vapor seal for reinforced aluminum faced fiberglass or mineral wool thermal insulation
Ultimate in Cold Weather Tapes
3M™ Venture Tape™ FSK Facing Tape 1525CW is coated with a pressure sensitive, cold weather solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. This adhesive features a quick stick at normal temperatures and superior low temperature performance. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesive, like 3M™ Venture Tape™ FSK Facing Tape 1525CW – to help businesses like yours operate faster, better and more efficiently.

Dynabrade 61203 RaptorVac Pneumatic DrumVac Kit, Single Operator, For Use With Tools
Dynabrade 51704 .1 hp Straight-Line Pencil Grinder, 50,000 RPM, 3mm Collet
Dynabrade 92103 3" W x 10-11/16" L 120 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 78487 3" Dia. x 1-1/2", 1/4-20 Female Center Thread, A/O, 120 Grit, 10-Ply J-DynaCut Cross Pad, 100/pack
Dynabrade 57940 - Dynafine Finger Sander Platen Pad 10-Pak
Dynabrade 55242 Vane Set (4pk)
Dynabrade 69359 Muffler Body
Dynabrade 15373 Side Handle Block
Dynabrade 78694 D22 Cartridge Roll Mandrel 1/4" Pilot Dia. x 1-1/2" Pilot Length, 1/4" Dia. Shank x 1-1/4" Shank Length
Dynabrade 94960 1/4" Composite-Style Coupler, 1/4" Female
Dynabrade 61447 Division 2, Pneumatic Vacuum, Auto On/Off
Dynabrade 53242 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 6,000 RPM, 5/8"-11 Spindle
Dynabrade 76016 Foam Pad
Dynabrade 11282 Contact Wheel Ass'y, 3/4" Dia. x 5/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
Dynabrade 50290 Guard
Dynabrade 52565 4-1/2"-5" (114 mm-127 mm) Dia. Right Angle Disc Sander
Dynabrade 58512 2-3/4" W x 7-3/4" L Dynabug II Orbital Sander, Central-Vacuum, .15 hp, 10,000 RPM, 3/32" Orbit
Dynabrade 59029S - 6" Central-Vac Dynorbital Spirit Random Orbital Sander
Dynabrade 32010 Dolly for RaptorVac DrumVac Kits
Dynabrade 57893 Front Bearing Plate
Dynabrade 51750 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
Dynabrade 56854BKV 5" Robotic Supreme Kit w/Vacuum
Dynabrade 11616 Contact Wheel Ass'y, 1" Dia. x 1" W x 5/8" I.D., Flat Face, 80 Duro Rubber
Dynabrade 79876 3" 1000 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
Dynabrade 01025 O-Ring
Dynabrade 53191 Ring Gear
Dynabrade 52218 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Long Shank, 20,000 RPM, 1/4" Collet
Dynabrade 55561 .7hp, Extended Right Angle Die Grinder, 18,000 RPM, Composite Housing, Rear Exhaust, 1/4" Collet
Dynabrade 92020 1" Dia. x 2" W, 60 Grit, Z/A DynaCut Band, 10/pack
Dynabrade 54789 4" (102 mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, Steel Housing, .7 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 54262 - 3" Vacuum, Hook Pad, .44" Thickness, 1/4"-20 Thread
Dynabrade 90817 2" Dia. x 1-1/2" W, Coarse, Non-Woven DynaBrite Band, 10/pack
Dynabrade 90970 2" Dia. x 40 Grit A/Z DynaCut Locking-Type (TR), Flap Disc, 10/pack
Dynabrade 57053 Speed Regulator
Dynabrade 11287 Contact Arm Ass'y, 3/4" Dia. x 5/8" W, Rubber Wheel, with 3/4" Platen 
