Tri-Directional Reinforced Backing
3M™ Venture Tape™ FSK Facing Tape 1525CW is a 5.5 mil tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a foil/scrim/kaft laminated backing coated with a cold weather acrylic adhesive. This backing is flexible and conforms well to irregular surfaces and curves. With superior resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in demanding cold and hot temperature applications. It applies easily to both fibrous and sheet metal ductwork and is easily installed without special tools or application methods.
3M™ Venture Tape™ FSK Facing Tape 1525CW is UL723 Classified (10/10 Flame/Smoke Rating). The facing meets ASTM C1136 type II and IV.
Recommended Applications
- Sealing applications for fibrous ductboard, sheet metal ducts and blankets
- Vapor seal for reinforced aluminum faced fiberglass or mineral wool thermal insulation
Ultimate in Cold Weather Tapes
3M™ Venture Tape™ FSK Facing Tape 1525CW is coated with a pressure sensitive, cold weather solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. This adhesive features a quick stick at normal temperatures and superior low temperature performance. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesive, like 3M™ Venture Tape™ FSK Facing Tape 1525CW – to help businesses like yours operate faster, better and more efficiently.

Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
Dynabrade 69361 Front Bearing Plate
Dynabrade 52678 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
Dynabrade 21489 3091, Counter Balanced Rotor Housing
Dynabrade 40353 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
Dynabrade 51631 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 50,000 RPM, 3mm Collet
Dynabrade 52373 4" (102 mm) Dia. Straight-Line Type 1 Wheel Grinder, 1 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 78632 3/8" Dia. x 1" W x 1/8" Center Hole, Z/A, 36 Grit, 100/pack
Dynabrade 79973 6" Dia. x 180 Grit Vacuum Hook-Face DynaCut Disc, 100/Box
Dynabrade 78695 D8-4 Cartridge Roll Mandrel 1/8" Pilot Dia. x 3/4" Pilot Length, 1/4" Dia. Shank x 4" Shank Length
Dynabrade 51863 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
Dynabrade 78026 3/4" W x 18" L Very Fine NWN DynaBrite Belt, 10/pack
Dynabrade 15003 Mini-Dynafile II Abrasive Belt Tool
Dynabrade 04069 Retaining Ring
Dynabrade 59163 5" (127 mm) Dia. Central-Vacuum Dynorbital Spirit Random Orbital Sander
Dynabrade Nitro Series 50218 Nitro Tool .5hp Die Grinder Kit
Dynabrade 53501 - .5 hp Straight-Line 7-1/4" Extension Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
Dynabrade 54785 3" (76 mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, Steel Housing, .7 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 52579 4" (102 mm) Dia. Straight-Line 6" (152 mm) Extension Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 15,000 RPM, 3/8"-24 Spindle
Dynabrade 93340 Carbide Burr, 3/32" Dia., SC-41 D/C Burr, Cylinder, 7/16" Flute L, 1/8" Shank
Dynabrade 48360 .4 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 54787 4" (102 mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, Steel Housing, .7 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 94877 Female Straight Connector (for 5/16" I.D. Hose)
Dynabrade 58034 1-1/4" Dia. Right Angle Mini-Orbital Sander, 4K RPM, .4Hp, Rear Exhaust
Dynabrade 47801 .4 hp Right Angle Die Grinder, Front Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 51392 6"-8" Dia. Right Angle Two-Hand Rotary Buffer, 1 hp, 2,800 RPM, Rear Exhaust, 5/8"-11 Thread 
