Designed for the 3M™ PPS™ (Legacy) Paint Preparation System
3M™ PPS™ Lid & Liner Dispenser makes it easy to access supplies such as lids and liners to be used with the 3M™ PPS™ (Legacy) paint preparation system. Our dispensers will hold at least 50 units of either lids or liners. Workers can easily release just one at a time. These dispensers are wall mountable to keep supplies close at hand and countertops open. Supplies for the 3M™ PPS™ are kept clean, neat, organized and free from contamination in our dispenser. When it is time to restock supplies, the top-loading access feature offers exceptional convenience.
Lid & Liner Dispenser Part Number 16299 can be used for Large, Standard, and Midi size PPS™ Liners.
Lid & Liner Dispenser Part Number 16299 can be used for Large / Standard, and Midi size PPS™ Lids.
Lid & Liner Dispenser Part Number 16298 can be used for Mini and Micro size PPS™ Lids and Liners.
Advantages of the 3M™ PPS™System
Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you’re ready to start spraying.
Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation – i.e. 360 degrees.
Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.
A Versatile System that Works with Most Spray Guns
Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.
Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 15%.
The Bottom Line: Why 3M is the Paint Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. Our goal is to help you operate with greater efficiency and spend less time on cleaning tasks (time associated with cleaning the paint reservoir and spray gun).

3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
Dynabrade 51624 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
Dynabrade 15420 Dynafile III Abrasive Belt Tool
Air Turbine Tools 310RSV - 6mm Router Hand Tool Series, 40,000RPM, 33441
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
3M 36852, Dirt Trap Protection Material, White, 28 in x 300 ft, 7000000528
3M 35825, Hookit Dust Extraction Flexible Sanding Block, 133 mm x 67 mm, 7100260505
3M 08364, Urethane Seam Sealer, Beige, 310 mL Foil Pack, 7100049259, 6 per case
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M 33066, Cloth Belt 341D, P100 X-weight, 25 in x 48 in, Sine-lok, Single-flex, 7010308084, 5 per case
3M 15145 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 1 in x 132 in, 7010364529
3M 26105, PPS Series 2.0 Adapter, Type S21, 14 mm Female, 1.0 mm
Thread, 7100135829
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
Dynabrade 91163 3/8" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
Dynabrade 40320 Dynafile II Abrasive Belt Tool
3M 26312, PPS Series 2.0 Spray Cup System Kit, Midi (13.5 oz, 400 mL),
125 Micron Filter, 7100169346 
