-
×
3M 06840, Booth Coating, 5 gal, 7000120531
1 × $467.27 -
×
3M 16325, PPS Lid & Liner Kit, Large (28 fl oz), 125 Micron Full
Diameter Filter, 25 Lids & Liners per kit, 7100003284
1 × $70.50 -
×
Dynabrade 69522 Housing for 69500, 5,000 RPM
1 × $77.04 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
400 × $1.61 -
×
3M 05783, Hookit Pad D/F, 8 in x 5 bolt hole, 7000119884
1 × $76.81 -
×
3M 16328, PPS Lid & Liner Kit, Micro (3 fl oz), 125 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7000045482
1 × $96.12 -
×
3M 07466, Scotch-Brite Roloc+ Clean and Strip Disc 7466, 4 in x 1/2 in S XCS, 7000120779, 10/case
10 × $15.07 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 76519, Cloth Belt 777F, 60 YF-weight, 2 in x 48 in, Film-lok, Single-flex, 7000148138, 50 per case
50 × $11.06 -
×
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
200 × $2.14 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 06223, Stikit Film Disc Roll 360L, P1000, 5 in x NH, Die 500X, 7010308877, 125 discs per roll
4 × $60.19 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
400 × $169.03 -
×
3M 26620, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Red, 2.0 mm, 7100141414 (4 Nozzles/Kit)
6 × $31.20 -
×
3M 81920, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 5 in x NH, Die 500X, 7000118204, 500 ea/Case
500 × $1.24
3M 31180, Platinum Plus Glaze, 30 fl oz, 7000045509
$55.84
Factory Stock, 7-10 Day Leadtime
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
