-
×
3M 57894, 642WY 1/4" X 24", 50000 Mesh Diamond Cloth Belt, 7100230570
15 × $0.00 -
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
3M 09095, Drywall Sanding Sponge 9095DC-NA, Dual Grit Block, 2-7/8 in x 4-7/8 in x 1 in, Fine/Medium, 7010383571
24 × $3.13 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 26580, Accuspray ONE Spray Gun System with PPS Series 2.0 Spray Cup System, 7100163226
2 × $348.22 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 45U
2 × $57.10 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
750 × $4.14 -
×
Dynabrade 91079 1-1/2" Dia. x 1-1/2" W, 80 Grit, Z/A DynaCut Band, 10/pack
10 × $1.82 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
3M 36866, Surface Protection Material Wall Applicator 36866, 28 in, 1/Case, 7100226306
1 × $1,775.62 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M 30702, Cloth Belt 577F, 50 YF-weight, 2 in x 132 in, Film-lok, Single-flex, 7010363104, 50 per case
50 × $12.36 -
×
3M 84158, Microfinishing PSA Film Disc 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7010360217, 500 per case
500 × $0.88
3M 31180, Platinum Plus Glaze, 30 fl oz, 7000045509
$55.84
Factory Stock, 7-10 Day Leadtime
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
