-
×
3M 21463, Marine Adhesive Sealant 5200, White, 5 Gallon Drum (Pail), 7010325698
1 × $1,029.08 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 28656, DISC PAD FACE PLATE RIBBED, 4 IN EXTRA HARD RED, 7010326835
10 × $17.00 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 35790, 675L, 1" X 120", 74u, Diamond Microfinishing Film Belts, 7010509196
2 × $97.15 -
×
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
250 × $1.37 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
12 × $5.70 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $746.76 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 30u
12 × $7.60 -
×
Standard Abrasives 32953, PSA A/O Disc, 711880, 2 in x NH, 60, 7010310798
100 × $0.00 -
×
Standard Abrasives 712230, Cartridge Roll Mandrel, 1/8 in x 2 in x 1/4 in x 1-1/4 in x 4 in CM-11, 7000121797
5 × $5.11 -
×
3M 13935, Hookit Film Disc 360L, P1000, 6 in x NH, Die 600Z, 7000144141, 500 per case
500 × $0.78 -
×
Standard Abrasives 704491, Cartridge Roll Mandrel, 3/16 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-15, 7000121768
5 × $4.88 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 71347, 641WY, 3" X 30", 220 Mesh, Diamond Cloth Belts, 7010534831
1 × $137.54
3M 31180, Platinum Plus Glaze, 30 fl oz, 7000045509
$55.84
Factory Stock, 7-10 Day Leadtime
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
