-
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
3M Cubitron 3 Fibre Disc 1187C, 80+, 7 in x 7/8 in, Die 700BB, 100 ea/Case, 7100349567
100 × $4.62 -
×
3M Cubitron 3 Cut-Off Wheel, 90034, 36+, T1, 4 in x 0.045 in x 3/8 in (100 x 1.6 x 9.53 mm), ANSI, 50 ea/Case, 7100304004
50 × $7.15
-
×
Dynabrade 53715 Housing for Model 13515; 3,400 RPM
2 × $180.23
-
×
3M Cubitron 3 Cut and Grind Wheel, 89157, 36+, T27, 4-1/2 in x 1/8 in x 7/8 in (115 x 3.2 x 22.23 mm), ANSI, 20 ea/Case, 7100305149
20 × $11.06
-
×
3M Cubitron 3 Fibre Disc 1187C, 80+, 4-1/2 in x 7/8 in, Die 450E, 50 ea/Case, 7100349681
50 × $4.42
-
×
Dynabrade 79054 1/8" W x 24" L 80 Grit A/Z DynaCut Belt, 50/pack
50 × $1.82 -
×
Dynabrade 96394 - 1-1/4" Coaxial Vac/Air Cuff
1 × $20.11 -
×
Dynabrade 79874 3" 600 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
1 × $35.37 -
×
3M Cubitron 3 Cut-Off Wheel, 90037, 36+, T1, 5 in x 0.045 in x 7/8 in (125 x 1.6 x 22.23 mm), ANSI, 50 ea/Case, 7100304007
50 × $6.10
-
×
Dynabrade 82570 1/4" W x 24" L 40 Grit Ceramic DynaCut Belt, 50/pack
50 × $2.70 -
×
Dynabrade 11005 Dynafile Belt Housing Guard
1 × $52.09 -
×
Dynabrade 14230 Rubber Drive Wheel
1 × $130.18 -
×
Dynabrade 18426 Vane Set (4pk)
1 × $20.20 -
×
Dynabrade 92758 3" W x 150' L 9 Micron A/O Lapping Film DynaCut Roll
1 × $191.12 -
×
Dynabrade 92772 4" W x 150' L 30 Micron A/O Lapping Film DynaCut Roll
1 × $196.99
-
×
Dynabrade 32012 Single Inlet
1 × $144.50 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00
3M 31180, Platinum Plus Glaze, 30 fl oz, 7000045509
$55.84
Factory Stock, 7-10 Day Leadtime
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
Adhesives & Sealants
3M 02690, Plastic Bonding Adhesive 2665B, Black, 30 cc syringe, 7100111531, 24/case
$1,986.27
