When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
Dynabrade 95544 Gear Grease, 2.5oz. Tube
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
Dynabrade 51301 .5 hp Straight-Line Die Grinder
3M 45722, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 6 in x NH, D/F 6HL, Die 600HZ, 7100113871
3M 45709, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 6 in x NH, Die 600Z, 7100113080
Dynabrade 15420 Dynafile III Abrasive Belt Tool
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
3M 07413, Hand Sanding Stripping Pad 7413NA, 4.375 in x 11 in, Green, Coarse, 7010383727
3M 54143, Particulate Respirator 8233, N100, 7000002028, 20 ea/Case
3M 26612, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Blue, 1.2 mm, 7100143442 (4 Nozzles/Kit)
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case 
