When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 21463, Marine Adhesive Sealant 5200, White, 5 Gallon Drum (Pail), 7010325698
3M 98514, Premium Matte Cloth (Gaffers) Tape GT2, Black, 48 mm x 50 m, 11 mil, 7010336132
Dynabrade 40320 Dynafile II Abrasive Belt Tool
3M 64070, Contractor Grade Pro Strength Duct Tape 3979, Silver, 1.88 in x 60 yd, 7010375912
Standard Abrasives 827600, Buff and Blend GP Power Pad, 6 in x 9 in, A VFN, 7010330610, 50 ea/Case
3M 62663, Scotch-Weld General Purpose Retaining Compound RT09, Green, 250 mL Bottle, 7010367430, 2/case
Dynabrade 14360 Pneumatic Pipe Belt Finisher
3M 45194, Disc Pad Face Plate 45194, 7 in Soft White, 7000120522
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
3M 85653, Thermosetable Glass Cloth Tape 3650, White, 5 in x 60 yd, 8.3 mil, 7010334203
3M 50019, Venture Tape Metallized Cloth Duct Tape 1502, Silver, 72 mm x 55 m (2.83 in x 60.1 yd), 7010296281
3M 92057, Vinyl Duct Tape 3903, Yellow, 3 in x 50 yd, 6.5 mil, 7010378167
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
ACS Diamond Cloth Belt, CX1250 3" X 90" 125U
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 62661, Scotch-Weld General Purpose Retaining Compound RT09, Green, 10 mL Bottle, 7100039228, 10/case
3M 50013, Venture Tape Cloth Duct Tape 1500, Silver, 72 mm x 55 m (2.83 in x 60.1 yd), 7010337384
3M 20230, Scotch-Seal Metal Sealant 2084, Silver, 5 Gallon Drum (Pail), 7000046344 
