When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 85561, Heavy Duty Duct Tape 3939, Silver, 24 mm x 54.8 m, 9.0 mil, 7000048814
3M 98534, Premium Matte Cloth (Gaffers) Tape GT3, Black, 72 mm x 50 m, 11 mil, 7010291525
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
3M 00581 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2-1/2 in x 60 in, 7010329198
Dynabrade 22092 2-3/4" x 17" Hand Sanding Block
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M 06728, Premium Plastic Sheeting with 233+ Masking Tape (36 mm), 16
ft x 400 ft, 7100139893
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
3M 36881, Self-Stick Liquid Protection Fabric, Blue, 48 in x 300 ft, 7100169351
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
3M 40776, Scotch-Weld Epoxy Potting Compound DP270, Clear, 200 mL Duo-Pak, 7100228179, 12/Case
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 05526, Wetordry Sponge Pad 20, 5-1/2 x 2-3/4 in x 3/8 in, 7000045663
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
Dynabrade 78127 3" Dia. Medium NWN VT DynaBrite Locking-Type Disc, 25/pack
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 67700, Cloth Belt 577F, 120 YF-weight, 3-1/2 in x 15-1/2 in, Fabri-lok, Single-flex, 7000119448, 50 per case
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
3M 77157 Scotch-Brite Durable Flex Belt, 77157, 1/2 in x 18 in, A MED, Trial Pack, 7010365702
3M 09413, Scotch-Brite Contour Surface Paint and Varnish Remover 9413NA, 7000052005 
