When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Dynabrade 51301 .5 hp Straight-Line Die Grinder
3M 69602, Cloth Belt 777F, 60 YF-weight, 1 in x 11 in, Sine-lok, Full-flex, 7010295223, 500 per case
Dynabrade 15420 Dynafile III Abrasive Belt Tool
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
Insize 4209-2, LONG HANDLE TELESCOPING GAGE, 1/2 ~ 3/4", 6928640311543
3M 80516, Disc Pad Face Plate Ribbed 80516, 7 in Medium Gray, 7000120515
3M 26005, PPS Series 2.0 Adapter, Type S4, 12 mm Female, 1.0 mmThread, 7100135830
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
Standard Abrasives 863110, A/O Unitized Wheel, 631, 2 in x 1/4 in x 1/4 in, 7000144629
3M 08981, Scotch-Weld Epoxy Adhesive DP105, Clear, 48.5 mL Duo-Pak, 7100148733, 12/case
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
3M 14725, Foam and Fabric Spray Adhesive 24, Orange, 16 fl oz Can (Net Wt 13.8 oz), 7100179450, 12/Case
3M 26557, Cloth Belt 341D, P180 X-weight, 2 in x 48 in, Film-lok, Single-flex, 7010307963, 50 per case
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 20905, PSA Cloth Disc 348D, P180 X-weight, 2 in x NH, Die 200P, 7000118876
3M 27008, 642WY, 3" X 30", 50000 Mesh, Diamond Cloth Belts, 7010533172
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
3M 05206, Marine Adhesive Sealant 5200, White, 1 oz Tube, 7010325697, 12/Case
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3 
