When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
3M 53034, 663FC, 3/4" X 90", 20u, Diamond Trizact Belt 7100205969
3M 34576, Cubitron II Net Sheet Roll, 220+, 115 mm x 10 m, 7100247509, 6 Rolls/Case
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 16205, PPS Disposable Lids, Midi, 125 Micron Full Diameter Filters, 7000120049
Dynabrade 93907 3" Dia. Side Spoked Diamond Mounted Cut-Off Wheel
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 55717, Stikit Film Disc 375L, 5 x NH P1000 w/Skipslit Liner, 7010363363, 250 per case
Standard Abrasives 898000, Buff and Blend Combi-Wheel, 2 in x 1 in x 1/4 in A MED 60, 7010331222
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 20913, PSA Cloth Disc 348D, 36 X-weight, 2 in x NH, Die 200P, 7000118919
3M 16054, Scotch-Brite EXL Unitized Wheel, XL-UW, 2A Medium, 3 in x 1/4 in x 3/8 in, 7000120761
3M 26312, PPS Series 2.0 Spray Cup System Kit, Midi (13.5 oz, 400 mL),
125 Micron Filter, 7100169346
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
3M 27423, Cloth Belt 340D, 80 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7100231504, 20 per case
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
Standard Abrasives 714719, A/O Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 80, 7100092959
Dynabrade 51624 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710 
