When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
3M 16205, PPS Disposable Lids, Midi, 125 Micron Full Diameter Filters, 7000120049
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
3M 26110, PPS Series 2.0 Adapter, Type S24, 1/4 Female, R-Angle 18
Thread NPS, Side Cup Mount, 7100135940
Dynabrade 13074 Arbor Assembly Kit, 5/8_ or 1_ Arbor Bore
3M 37006, Lens Assembly 6898/37006(AAD), Replacement Part, 7000002036, 5 EA/Case
Dynabrade 51301 .5 hp Straight-Line Die Grinder
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
3M 36876, Self-Stick Liquid Protection Fabric, Blue, 4 in x 300 ft perroll, 7100169348, 6 Rolls Per Pack
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M 35519, Rubber Sanding Block, 2-3/4 in x 5 in, 7000126109
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
Dynabrade 95544 Gear Grease, 2.5oz. Tube
3M 16115, PPS Cup & Collar, Mini, 7000028417, 2 per carton 
