When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
Dynabrade 15420 Dynafile III Abrasive Belt Tool
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
3M 34672, 641WY, 1/2" X 64", 100 Mesh, Diamond Cloth Belts 7100111364
3M 20931, PSA Cloth Disc 348D, P100 X-weight, 1 in x NH, Die 100N, 7000118915
3M 53036, 663FC, 1/2" X 90", 20u, Diamond Trizact Belt 7100205970
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
3M 08301, Ultrapro Autobody Sealant, 08301, Tan, 5 oz Tube, 7100142901, 6 per case
3M 66631, Cloth Belt 341D, 60 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118865, 20 per case
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 04274, NVH Dampening Material, 04274, 200 mL Cartridge, 7100004038, 6 per case
Dynabrade 51750 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790
3M 73559, Mix & Dispense Equipment - Application Tools, 4 in Cut Roller, 7100207927
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 20927, PSA Cloth Disc 348D, P240 X-weight, 1 in x NH, Die 100N, 7000118918
3M 28214, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 2 in, Die R200P, 7010361116
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
Dynabrade 98270 1/2" Male Coupler
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 65749, Detector Loop Sealant 5000, 1 Liter, 3M 7000056794, 12 per case
3M 62610, Scotch-Weld Threadlocker TL62, Red, 50 mL Bottle, 7100039196, 10/case
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M 33439, Cubitron II File Belt, 33439, 60+, 10 mm x 330 mm (3/8 in x 13 in), 7100033194, 10 belts per carton, 5 cartons per case
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M 05612, Polyurethane Glass Adhesive Sealant 590, Black, 600 mL Sausage Pack, 7000121536, 12/Case
Standard Abrasives 716916, Cartridge RoII Mandrel, 6997818, 1/8 in x 3/4 in x 1/4 in x 6 in CM-XL, 7010368732
3M 82597, Hot Melt Adhesive 3764 AE, Clear, 0.45 in x 12 in, 7000000885, 11 LBS/Case 
