When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
Dynabrade 51865 1.0 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
Dynabrade 95713 1/4" NPT Female _ 1/8" NPT Male, 1" Length
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
3M 06856, Overspray Masking Liquid Dry, 15 Gallon, 7100136757
3M 62607, Scotch-Weld Threadlocker TL42, Blue, 250 mL Bottle, 7100039192, 2/case
3M 89486, Scotch-Weld PUR Applicator Heat Tube Assembly (120V) Kit, 7010329969
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle, RightAngle, 7000058900
3M 62611, Scotch-Weld Threadlocker TL62, Red, 250 mL Bottle, 7100039195, 2/case 
