When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 49689, PSA Cloth Disc 348D, 60 X-weight, 10 in x NH, Die 1000C, 7010326501
3M 19814, Nitrile High Performance Plastic Adhesive 1099, Tan, 5 Gallon Drum (Pail), 7000000798
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
Air Turbine Tools 310RDM - 6mm Router Hand Tool Series, 30,000RPM, 33433
3M 29836, Sanding Screen, 60 Grit, 18 in x NH, 7100160820
3M 13718, Scotch-Brite EXL Unitized Wheel, XL-UW, 2S Fine, 3 in x 3/4 in x 1/4 in, 7000046025
3M 26557, Cloth Belt 341D, P180 X-weight, 2 in x 48 in, Film-lok, Single-flex, 7010307963, 50 per case
3M 62813, Adhesive Sealant 740 UV, Gray, 290 mL Cartridge, 7100111087, 12 per case
3M 30202, Disposable Plastic Wheel Maskers, 12 in - 15 in, 125 per box, 7000125074
3M 62602, Scotch-Weld Threadlocker TL22, Purple, 50 mL Bottle, 7100039159, 10/case
Dynabrade 51632 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
3M 08994, Scotch-Weld Epoxy Adhesive DP100, Clear, 48.5 mL Duo-Pak, 7100148763, 12/case
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 62606, Scotch-Weld Threadlocker TL42, Blue, 50 mL Bottle, 7100039193, 10/case 
