When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
Dynabrade 60052 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 35,000 RPM, 3/32" Collet
3M 57894, 642WY 1/4" X 24", 50000 Mesh Diamond Cloth Belt, 7100230570
3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
Standard Abrasives 547003, Adapter, 5/8"-11 Male x 3/8"-24 Female, 7010368726
3M 62617, Scotch-Weld Threadlocker TL90, Green, 250 mL Bottle, 7100039235, 2/case
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 20908, PSA Cloth Disc 348D, P100 X-weight, 2 in x NH, Die 200P, 7000118874
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 49941, Roloc Disc 361F, 80 YF-weight, TSM, 3 in, Die RS300VM, 7000148151
3M 81283, Scotch-Weld High Strength Retaining Compound RT38, Green, 50 mL Bottle, 7010310185, 10/case
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
3M 26128, PPS Series 2.0 Adapter, Type S33, 1/8 Female, 27 Thread NPT, 7100135950
3M 20274, Neoprene Contact Adhesive 10, Light Yellow, 1 Gallon Can, 7000144610, 4/case
3M 62607, Scotch-Weld Threadlocker TL42, Blue, 250 mL Bottle, 7100039192, 2/case 
