When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Provides High Shear and Peel Strength and is Toughened for Impact Resistance
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 29827, Sanding Screen, 120 Grit, 19 in x NH, 7100160249
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
3M 81109, Microfinishing PSA Film Disc Roll 268L, 3 in x 7/8 in x 250, 30 Micron, Type D, Die 300M, 7100070631
3M 94717, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1 in x 30 in, Fabri-lok, Single-flex, 7010294445, 200 per case
3M 16585, Accuspray Atomizing Head, Clear, 1.8 mm, 7100078990
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
Dynabrade 92585 3-1/2" Dia. x Medium Hook-Face Surface Conditioning DynaBrite Disc, 10/pack
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
3M 76632, Roloc Disc 777F, 50 YF-weight, TR, 3 in, Die R300V, 7000045628
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
3M 07266, Scotch Strapping Tape 8950-RD-6GC, 1.88 in x 30 yd (48 mm x 27.4 m), 7100269781
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
Norton 66261013403 - 3" X 1/2" Extra Coarse Grade Silicon Carbide Bear-Tex Rapid Strip TR Stripping Disc, 10 Each
3M 73540, Mix & Dispense Equipment Nozzle, Replacement, 1 in, 7100207939
3M 29825, Sanding Screen, 60 Grit, 20 in x NH, 7100160253
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
Dynabrade 01468 Spring
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
3M 95725, Venture Tape Metal Building Facing Tape 1552CW, White, 72 mm x 45.7 m, 7010313505 
