When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Provides High Shear and Peel Strength and is Toughened for Impact Resistance
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
3M 10112, Heavy Duty Stripping Pads, 3 3/4 in x 6 in x 7/16 in, 7010290303
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
Standard Abrasives 727398, Buff and Blend Cross Buff HS, A/O Coarse, 2 in x 3/4 in x 2 Ply x 1/4-20, 7010369357
3M 29833, Sanding Screen, 120 Grit, 18 in x NH, 7100160843
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
Dynabrade 51857 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
Standard Abrasives 54022, Ceramic Pro Type 27 Flap Disc, 645115, 7 in x 5/8-11 40 Y-weight, 7010369541, 10 per case
3M 10455, Cloth Sheet 481W, 220, 9 in x 11 in, 7010294811
3M 62602, Scotch-Weld Threadlocker TL22, Purple, 50 mL Bottle, 7100039159, 10/case
Dynabrade 51862 .4 hp Trim Router (Complete), 30,000 RPM, 1/4 Collet
Standard Abrasives 701656, Cartridge RoII Mandrel, 3/16 in x 2 in x 1/4 in x 1-1/4 in x 4 in CM-18, 7010368730
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 19770, Utility Cloth Sheet 314D, 9 in x 11 in P120 J-weight, 7000000358
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
Dynabrade 51865 1.0 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
3M 94733, Cubitron ll Cloth Belt 947A, 60+ X-weight, 3-1/2 in x 15-1/2 in, Fabri-lok, Single-flex, 7100093314, 50 per case
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 26578, Accuspray ONE Pro Spray Gun Kit for PPS Series 2.0, 7100158715
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case 
